FS: E55K (w211) AMG Brembo Calipers front and Rear

Front calipers weigh 13.3 lbs each without pads
rear calipers weigh 5.3 lbs each without pads

Email me for pictures.

$1500 FIRM + Shipping.

If you want rotors and pads, I can get you OE rotors and ATE pads for about $750 extra + shipping.

I'm looking for a quick sale.

Thanks

Some of you have been asking me about E55K brakes on a w211. This is what I found:

Regarding fitment on w211:

I did a little research on these E55K brakes going onto a w211 car.

I searched the MBworld's w211 forum with search word "spindles"

It seems like the E55K calipers use an M14 bolt, and therefore the E55k spindles are made with 14mm holes. Mark Cummings said that one could drill the spindle from 12mm to 14mm or buy the E55k spindles. Personally I would get the E55k spindles so you can return your car to stock if you so desire.

Or at the very minimum, remove the spindles and have a machine shop enlarge the holes. If you do this with a drill and drill bit free hand, you will give too much slop. I would have the machine shop drill, and then ream to final size. That shouldnt take too long provided they can fixture the spindle. Any machinist with a bridgeport mill should be able to handle this task.

Like I have said before, the burdent of fitment is totally on the buyer.