|
|
|
#1
|
|||
|
|||
Need om603 injector line
I am in desparate need of either the #6 injector line, or a set of injector lines, for the om603 in my 1987 300TD. New or used. My #6 cracked.
Please help!! |
#2
|
||||
|
||||
I'm probably a little over an hour from you, in Holland, Michigan (80miles up I-96/I-196 from the IN/MI border). I have the lines on an 87 engine, were clipped in (clips brittle and broke when I disassembled).
Anything else you need? I've got most of my former '87 300D parted and in boxes, need to downsize, and a few T124 parts (mostly W124 though). PM if interested.
__________________
Gone to the dark side - Jeff |
#3
|
||||
|
||||
After you get a good line installed, PLEASE replace all the clips & foam buffers... that is probably why the line failed in the first place. They're pretty cheap, and it's easier to replace all of 'em if you pull the intake. Photos below...
This is what can happen if you do NOT replace worn / broken injection line clips! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|