300E parting out 1988 W124 - Page 4 - PeachParts Mercedes-Benz Forum

pesuazo · #46 12-03-2008, 09:27 AM

Hanno,
Sorry if you had said this, but I did not want to read thru every single thread.
What is the condition of the fenders?
Will they fit a 94 420E?
How much?
I definitely need the passenger side, considering to fix the rust on the driver side.

ZIP CODE 27520

hanno · #47 12-03-2008, 09:48 AM

pesuazo, The left fender is close to perfect, right has a small ding (dime size) in the wheel arch. Send a pm with your email address and I'll send pictures and a delivered price this evening.

I'm sure they will bolt on to your E420, but you need to verify fit of your trim cladding (these fenders are 1988 old style with thin trim strips). Search for "cladding" on this site, I think there's information out there.

Hanno

hanno · #48 12-18-2008, 07:39 PM

Bump. Its time to make space: Major and minor parts still available: fenders, hood, doors (except left rear) trunk. All in arctic white #147 and almost perfect, carpet set, “A” pillar trim, leather rear seat and backrest, sill plates, console (no wood), parcel shelf. All in medium red #277. Black dashboard (no cracks), headliner, sunroof, glass, taillight lenses and reflector panels, front suspension and brakes, rear suspension, differential, rear bumper, plastic trim, trinkets and panels, steering wheel, OVP relay (dual fuse version), Jetronic ECU, ABS pump, alarm module, wiring and assorted harnesses, hard brake and fuel lines, outside mirrors, first aid kit, etc. Also undamaged frame arms with radiator/bumper cross members.

I can ship anywhere except for the hood and trunk lid, which will be pickup (Middletown, DE). Send a zip and what you are interested in and I'll quote delivered to your door (or Greyhound Station for the doors).

badtrukrisin · #49 12-18-2008, 08:26 PM

Hanno, do you still have that part? Mine is slowly disintegrating!
Bud

Bio300TDTdriver · #50 12-18-2008, 10:36 PM

Do you have the wiper motor and arm still?

Chris

hanno · #51 12-19-2008, 07:58 AM

The inside mirror has been sold, sorry. Outside mirrors are still available.

The wiper motor assy and arm is available but I don't remember using it when I purchased the car a few months ago. I'll verify operation this evening and advise a delivered price.

hanno · #52 12-24-2008, 07:56 AM

Bump. The wiper motor sale didn't happen so its available. Test shows proper function, quiet operation. You get complete assembly (motor, bracket, linkage, transmission, arm, blade). $68 delivered to your door.

Also again available is the oxygen sensor. It has surfaced after several months among the missing

. It works fine, car was PA emission inspected and passed earlier this year before being parked/parted. $25 delivered.

A good spring base for front seat, $25 delivered.

I'll ship anywhere, but "delivered" only applies to the 48USA. Others pay actual shipping.

Hope you all have a very Merry Christmas (or what you celebrate)!

blloyd7 · #53 12-25-2008, 12:25 PM

Zip is 22314.
Visors?

Thanks

Reply to: workout33@yahoo.com

hanno · #54 12-25-2008, 01:17 PM

Merry Christmas!

Both the visors and the bulb holders have been sold. I do have the taillight lenses and reflectors if you need them.

jd190d · #55 12-25-2008, 06:12 PM

Need front suspension....right front...plastic rocker molding under doors, both sides? Thanks for your time Jim D.

jd190d · #56 12-25-2008, 06:15 PM

Zip is 06782, Thanks

hanno · #57 12-26-2008, 11:08 AM

Jim, good morning!

How much of the right front suspension are you interested in? I'm assuming spring, control arm, strut (aftermarket), strut mount, spindle (or we can go further and cut frame rails if you need them). Should I include sway bar and mount?

I think I have both door bottom trim pieces, will need to check (car is not stored here).

Le me know what you need, I'll check the trim on Monday (will be gone this weekend).

Thanks, Hanno

jd190d · #58 12-29-2008, 09:21 PM

Thanks Hanno for the reply....I hope you were not kidding about the cutting the frame rails ???

What I need is the coil spring top perch, coil spring, and all related shims, and misc. peices...if you can cut the frame 3-4 inches each side of the perch I can trim things down as I need to. Or maybe you have a different idea ?

I thought I had a ball joint problem...now with the car on a lift I can see the top of the spring perch is rotted away and the coil spring flew the coupe...I when back to look for the spring but with the last two snow storms the State Plows must have push it to the next county somewhere by now.

Let me know what you think ???

hanno · #59 12-30-2008, 11:53 AM

Jim, assuming your control arm is OK, I read your post as needing 3 pieces: the spring, the rubber pad on top of it (may be a different thickness than yours), and the spring perch with enough "meat" around it to allow you to weld it in properly (3-4 inches). I'll verify condition of the right side tonight. If OK I'll let you know plus a delivered price.

I have 3 door bottom trim strips (no left rear), but they may be sold. Will get back to you if not.

babymog · #60 12-30-2008, 02:47 PM

I think he's looking for the '90-up plastic rocker-panel covers.