This is a rebuilt cylinder head originally removed from a 1992 Mercedes Benz 300e 2.6. Note, this will not work on 3.0L cars to my knowledge, but should work on all 300e’s that have the 2.6L engine, and possibly also on 190e models with the 2.6L engine. I had this rebuilt as a spare after finding another for my personal car. Some exhaust studs have been replaced, several are still missing. Threaded holes are still good, but just never replaced all of them because I never reinstalled it. Includes exhaust gaskets, maybe an intake gasket if I can find it.
This head was removed due to the infamous head gasket leak. It was not overheated. It was rebuilt with new valve stem seals, valves were lapped, one intake and one exhaust valve are new, head was checked for straightness and pressure checked. I have receipts to prove all work done to the head. Valve stem seals are a weak point in high mileage examples of this car. Work done with cost of parts exceeded $400. Hope someone else out there can use this. Shipping will be expensive, local pickup in Mooresville, NC.