I don't go back in to work until later in the week so I will be cleaning off the rim as you requested. I do know that the spare is still in the trunk, not sure of the condition though. It didn't come with the hubcaps or clips unfortunately. Also no manuals or paperwork that I have come across yet. The toolkit is there but is the soft sided case not the hard one. The triangle is also mia. I am almost certain that the trailer hitch is an add-on. The weld job doesn't look original but I could be wrong.

Please bear with me. I have limited internet access and the vehicle is not stored at my residence. Once I get video of it running, I will begin pulling bits off. I am also in the process of pulling my 190d engine to send to the machine shop.

No clue on a price. I will have to get back to you on one as well as the shifter surround.

Here are a few more pictures of the hitch, plastic bits, and first aid kit. Still haven't gotten video of it running yet so haven't started pulling parts. It will be soon though. Sorry for the delay.

There are 3 pieces of plastic which go on top of the front 3-piece Euro bumper. NOT the end pieces which connect the fender to the L&R end pieces of the bumper. Those 3 pieces pretty much cover the entire top part of the front of the bumper.

Do you have those?

I will get you some more detailed photos of the bumpers. The front bumper has some trim missing that you can see in one of the pictures but not sure if that is what you are talking about.

On the front bumper, I was hoping for the metal brackets mentioned that brace the corners of the bumper and hold down the rubber trim. Mine are toast from rust
NEed to use alot of PB Blaster or other "break free" on the nut and slowly loosen at the correct angle or the skinny welded bolt's stem will snap off (ask me how I know....)

And if they are available, I might need the same pieces along with the small corner rubber trims for the rear.

Then, if the hitch will unbolt I might like to have it too. Nice that it clear the euro sized bumpers like I am using now
Hope it isn't welded on.

Cool first aid book. I will have to look if I have one of those or not (slightly addicted to collecting here!)

__________________
1990 300D 2.5Turbo, two tank WVO, daily driver 300,911
1992 E300 gaser, 150k. Parts only, For Sale

[B]1984 300TD Euro 4speed Sold
1977 300D Elsbett SVO single tank Sold
1981 300TD "Silver bullet" 285k ran B100 Sold
1981-5 300D x 5 cars stripped and reused, parts for sale

Other toys:
1995 Dodge 2500 Cummins 12V P7100 Bosch mechanical pump with 2 tank veggieconversion kit, only 120k!
1959 Cadillac Dad's legacy, needs finishing

Thanks for the console pics, too bad about that crack in the front corner. The switch plate can be CAREFULLY separated from the shifter surround and still be used though and be cheaper to ship.
How much shipped to LA Ca. for that with the switches and the piece above the climate control?
Thanks

__________________
'70 F100 shortbed
'82 Diesel Westy
'83 Euro 300TD
Curtlo Viper
Yeti ARC
Surly long haul trucker

Is the tranny still available & if so how much??

I'm interested in the injection pump, lines and injectors.

PM me

__________________
1982 300GD Carmine Red (DB3535) Cabriolet Parting Out
1990 300SEL Smoke Silver (Parting out)
1991 350SDL Blackberry Metallic (481)

"The thing is Bob, its not that I'm lazy...its that I just don't care."

You are wanting all of the window and hazard switches correct? I will have to test them to be sure that they work. I'll have to box it up and weigh it to give you an idea on shipping. What is a good zipcode for getting a quote?

PM about to be sent.

It is still available but I have never shipped an engine or transmission before. I see that you are in Georgia and would prefer the heavy items be picked up locally. I would like $125 for it. Thanks.

Still haven't gotten around to checking the bumpers. I am pretty sure that the hitch is welded to the rear bumper. If you still want it I can cut the weld but you would have to have it welded or fabricate something to make it work.

I am going to pull both bumpers and take pictures so that you and NC Friend can see exactly what I have and I will take detailed pictures. If I'm not clear on what you need then maybe you can use MS paint and circle exactly what you want in the pictures. I will post photos either Tuesday or Wednesday. Thanks.

Sorry for the multiple replies. I just found out about the multi-quote feature and will be using it in the future.

91602
I just need the window and the mirror switch.
I forgot what switches are in the trim above the climate control though.
Thanks

__________________
'70 F100 shortbed
'82 Diesel Westy
'83 Euro 300TD
Curtlo Viper
Yeti ARC
Surly long haul trucker