Blow Out: Lots of w123 wagon parts - PeachParts Mercedes-Benz Forum

andrewjtx · #1 09-29-2013, 08:33 PM

I'll be selling my '85 300td shortly and I want to clear out the stockpile of parts salvaged from my '84 a couple of years ago. All parts have been stored in an insulated garage.

I haven't had a chance to think of prices yet and especially without knowing what is needed/wanted most. If you see something you need/want, PM or email me and we'll come up with a mutually agreeable price. I need to clean this garage out so I can epoxy the floor and get the new E300D in there (yeah, yeah - the wife's car too) for the winter.

BODY
• Driver front & rear doors (manganese brown, no significant dents, slight rusting of the lower gasket channel , all glass included.) LOCAL ONLY
• W123 hood (manganese brown, metal in great condition, paint – not so much)
• W123 front fenders (manganese brown, metal in great condition, paint – not so much. Non-glued version, no damage from removal)
• Both side mirrors, chrome & black rubber in good condition (manual driver, power passenger)
• Wagon manual sunroof panel (new genuine Mercedes hardware for sliders and locking arms
• Full set roof rack, all chrome in good condition.
• w123 Wagon hatch hinges

Underneath

• Wagon Exhaust (entire lower section, minus the flex joint/downpipe, no holes) LOCAL ONLY
• Rear subframe LOCAL ONLY
• Rear trailing arms LOCAL ONLY
• Wagon front sway bar (new condition, powder coated half-gloss black, perfect ends – no rust)

Interior

• Rear pillar covers for wagon 1/3rd row (palomino)
• Rear wheel hump covers (pinkamino)
• Brown center console (no major damage, possible a mount point cracker or broken, cover in great condition)
• Brown Dash (minor cracks on top, center wood missing, other wood in good shape)
• Rear 60/40 bench with no headrests, some tears in palomino leather
Electrical
• 1985 OM617 EGR controller (excellent condition, all pins clean, no corrosion)
• 1984 A/C and Heater control modules (000 822 1003 & 000 822 1103)

1984 turbo air cleaner assembly & u-pipe (non-arv)

Glass (prefer local only)

Wagon passenger side glass (every piece, good condition)
Wagon rear windshield

Lots of other parts, including a large box of nuts, bolts, small bits, all labeled and bagged. If you have a odd part request for a 123 wagon, let me know. I probably have it.

I'll try to get pics posted this week. Definitely get them to you on request.

andrewjtx · #2 10-08-2013, 04:05 PM

Here is the hood:

Mercedes w123 Hood

It's listed for $125 on CL, but $100 to any forum member willing to come pick it up.

andrewjtx · #3 10-08-2013, 04:13 PM

Dash:

Mercedes w123 Dash

james.orr · #4 10-08-2013, 04:33 PM

Do you have the rear speaker Trim and back Pillar Covers in Palomino?

andrewjtx · #5 10-08-2013, 04:56 PM

Speaker panel, I do. One corner where it screws to the body is a a bit tweaked, but holds in place well. Possibly repair the board? $45+shipping?

On the back pillars, I only have a set for 3rd row seating. I'm hoping to keep those together with my 3rd row seat. Whole kits tend to fetch some nice coin.

bluestein1 · #6 10-09-2013, 02:49 PM

Quote:

Originally Posted by andrewjtx

I'll be selling my '85 300td shortly and I want to clear out the stockpile of parts salvaged from my '84 a couple of years ago. All parts have been stored in an insulated garage.

I haven't had a chance to think of prices yet and especially without knowing what is needed/wanted most. If you see something you need/want, PM or email me and we'll come up with a mutually agreeable price. I need to clean this garage out so I can epoxy the floor and get the new E300D in there (yeah, yeah - the wife's car too) for the winter.

BODY
• Driver front & rear doors (manganese brown, no significant dents, slight rusting of the lower gasket channel , all glass included.) LOCAL ONLY
• W123 hood (manganese brown, metal in great condition, paint – not so much)
• W123 front fenders (manganese brown, metal in great condition, paint – not so much. Non-glued version, no damage from removal)
• Both side mirrors, chrome & black rubber in good condition (manual driver, power passenger)
• Wagon manual sunroof panel (new genuine Mercedes hardware for sliders and locking arms
• Full set roof rack, all chrome in good condition.

Underneath

• Wagon Exhaust (entire lower section, minus the flex joint/downpipe, no holes) LOCAL ONLY
• Rear subframe LOCAL ONLY
• Rear trailing arms LOCAL ONLY
• Wagon front sway bar (new condition, powder coated half-gloss black, perfect ends – no rust)

Interior

• Rear pillar covers for wagon 1/3rd row (palomino)
• Rear wheel hump covers (pinkamino)
• Brown center console (no major damage, possible a mount point cracker or broken, cover in great condition)
• Brown Dash (minor cracks on top, center wood missing, other wood in good shape)
• Rear 60/40 bench with no headrests, some tears in palomino leather
Electrical
• 1985 OM617 EGR controller (excellent condition, all pins clean, no corrosion)
• 1984 A/C and Heater control modules (000 822 1003 & 000 822 1103)

1984 turbo air cleaner assembly & u-pipe (non-arv)

Glass (prefer local only)

Wagon passenger side glass (every piece, good condition)
Wagon rear windshield

Lots of other parts, including a large box of nuts, bolts, small bits, all labeled and bagged. If you have a odd part request for a 123 wagon, let me know. I probably have it.

I'll try to get pics posted this week. Definitely get them to you on request.

Hello,
Looking for both headlight housings and turn signal lenses and the battery tray.

You can email me at bluesteinm@gmail.com or here if you wish.

Thank you.
bluestein1

andrewjtx · #7 10-16-2013, 01:33 PM

Added wagon hinges.

andrewjtx · #8 10-17-2013, 10:57 PM

Keep asking for wagon parts folks. Just because it isn't here, doesn't mean I don't have it. Means I have dug it out yet...

Fattyman · #9 10-18-2013, 01:50 AM

How much for a pinkomino interior wheel cover shipped to LA Ca.?
THANKS

andrewjtx · #10 10-18-2013, 02:18 AM

$25+shipping for the pair.

Since they are an odd size that I don't have a box for, I will need to take them down to the UPS store and get it quoted for you. Will do that first thing after dropping my son at school in the morning.

andrewjtx · #11 10-18-2013, 11:00 AM

Estimate from ups store is $120 (gasp) for a box, packing and ship charges via ups ground.

Very odd size. I can find a single box that these fit in, even at the recycle yard which had tons of packing boxes...

andrewjtx · #12 10-21-2013, 10:52 AM

I now have a long box that will fit the wheel arches, B-pillars, etc.

If you need palomino wagon interior parts, let me know! It was $65 to ship this box up to 50lbs from TX to CA, so probably the same for anywhere else in the country.

Willing to negotiate heavily for anyone needing several parts.

Zacharias · #13 10-22-2013, 03:41 PM

Ok everyone is saying Palamino but I would call these parts beige. Is my monitor not showing the right colour?

I would expect the interior stuff to have a definite red/pink tinge in the pics.

I am asking as I have a car that was originally palomino but has (mostly) been changed over inside to beige.... I need beige stuff bad.

Thanks

andrewjtx · #14 10-22-2013, 03:45 PM

They are definitely palomino. I am certain of the interior color code on both of my wagons.

I have nothing beige. Not my walls, not my pants, and definitely not my seats.

Zacharias · #15 10-22-2013, 03:59 PM

Oops. Senior moment.

Of course I meant to say: TAN

Tks anyway