Quote:
Originally Posted by Jooseppi Luna
Kinda, not really. The CC arm is attached to the multifunction switch, but it is separate and can be unbolted. The two are wired totally separately.
|
Agreed, the switches are separate.
If all you need is the combo switch (turn signal, wiper, headlight flash/high beam ONLY), then the cruise control switch can be removed and placed on the replacement unit.
I replaced my original combo switch with new from MB. Easy install on the W123 - no need to remove steering wheel unlike later chassis.
While I was at it I also replaced the rubber cover on the steering column.
MAKE SURE you do not break the copper contact points when installing replacement (used or new) unit.
03-21-2014, 12:14 AM
Linear Mode
