Rear Power Window Problems
 

Already replaced the switches and have had no problems since then on 1998 ML320, but yesterday the rear window was accidentally sent by my elbow and I heard a loud pop and something broke hitting bottom of door! Further investigation reveals that a rather large plastic ring that seems to guide the cable has broken and the cable is just hanging loose in the door! Can't figure out if I just need to find another White Plastic Ring cable guide(don't really know what to call it) or how I am going to fix this problem? For now disconnected the power to motor and wedged the window up so it wont fall down inside the door! Anyone have a similar problem with the rear power windows? Any advice or is this something I will have to visit the dealer to get fixed? Searched for the actual piece that broke but can't seem to find it. PLEASE HELP with any advice, Thanks!
:confused:

Not familiar with this part, but based on past experience, it'll be needing the regulator. I'm not sure if this means the whole motor or if the regulator is available seperately from the motor.

Gilly