PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   ML, GL, G-Wagen, R-Class, Unimog, Sprinter (http://www.peachparts.com/shopforum/ml-gl-g-wagen-r-class-unimog-sprinter/)
-   -   Bose with Nav Failure on 2000 ML320 (http://www.peachparts.com/shopforum/ml-gl-g-wagen-r-class-unimog-sprinter/184995-bose-nav-failure-2000-ml320.html)

schnauzergirl 04-10-2007 05:02 PM
Bose with Nav Failure on 2000 ML320
 
I just purchased a 2000 ML320 with 66k miles on it. Took it on a road trip this wknd. After about an hour on the road and from switching from a CD to the radio, none of the controls worked. I had to pull over, turn the car off so that the radio would turn off. When I restarted the vehicle, the entire Bose system would not turn on and I heard a whirring sound the rest of the trip. That stopped later that day but now nothing is operational with the system. Any suggestions? Thanks in advance.:confused:

waybomb 04-10-2007 07:34 PM
Did you try pulling all the fuses for nav / radio and putting them back in?
The radio should prompt you for a code after it has lost power for a while. If you don't have the code, you'll probably have to stop by a dealer to get it. If the radio does not turn on with "CODE" on the screen, you'll probably have to get it checked out at a dealer.

I have no idea if this would help, but like most things with electronics, cold boots do wonders sometimes.

azinn 04-10-2007 08:46 PM
Quote:
Originally Posted by schnauzergirl (Post 1476218)
I just purchased a 2000 ML320 with 66k miles on it. Took it on a road trip this wknd. After about an hour on the road and from switching from a CD to the radio, none of the controls worked. I had to pull over, turn the car off so that the radio would turn off. When I restarted the vehicle, the entire Bose system would not turn on and I heard a whirring sound the rest of the trip. That stopped later that day but now nothing is operational with the system. Any suggestions? Thanks in advance.:confused:
Been there done that. Pulling Fuse #21 and reinserting always works for me. Make sure you have the radio code handy to get things up and running again. My 2 cents. :thumbsup:

schnauzergirl 04-13-2007 11:15 AM
Thanks everyone! It DID work!! I had John from Benzmobility check it out and that indeed was the issue. Life is good!:)


All times are GMT -4. The time now is 10:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website