|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Control arm or wishbone wear on tierods front and rear tire upper control arm/wishbon
Hi there. w163 Ml 320 2002 manufactured in July of 2001
Anyone kind enough to provide me with a schematic or picture of the rear wheel assembly and front wheel assembly with torque spec would be greatly appreciated. And any useful tips on how best to ....... even further appreciated Problem 1. It would appear that upon jacking the rear wheels and grabbing the tire at 12 o' clock position and pushing forward there is play in the upper wishbone in the rear nothing on the 3 and 9 position also no play with crow bar under the rear tire and pushing down on the crowbar in the ball joints.-- so I have to replace the upper wishbone or control arm I guess 2. In the front grabbing at 3 and 9 position play in the tie rod ends -- so I guess replace the front tie rod ends (and nothing at 12 and 6 or crow bar under the tire a pushing down on the crow bar no play) To ADD: my discovery of the above was I received a complaint from the driver that at different speeds there would on an occasions be a vibration -- given the above is that a possible cause The rear tire control arm comes as an entire unit?? and you cannot purchase the end rubber "tie rod bushings" ?? |
#2
|
|||
|
|||
No worries I got some HUGE assistance at benzworld.org
Thank you Last edited by Smith007; 07-01-2014 at 08:29 PM. |
#3
|
|||
|
|||
Left rear toe arm ball joint. I assume this is the correct name -- can someone send or post a picture and schematic thereon and the torque specs?
PLEASE |
Bookmarks |
|
|