|
|
|
#1
|
||||
|
||||
ML350 Engine Mounts 06 W164
Members:
The mounts on my ML are in need of replacement. After surveying the accessibility of the mounts, I can not figure out how to get to them. Looking for tips on line has not been helpful. I can find very little on line concerning the W164. I've performed at least a half a dozen mount replacements on other Benz models (124, 201, 210, 211 ....inline 6, v6 and v8 configs)....so I am up for the challenge. ...or at least I think I am.... In all those successful cases, I was able to figure out an approach. The W164' the the 4-matic and steering rack in the way of the drivers side mount, I am stumped. Your advice and suggestions are greatly appreciated
__________________
Jeff '87 300E '92 400E '06 ML350 Last edited by jc300e; 06-10-2014 at 04:08 PM. Reason: edit text |
#2
|
|||
|
|||
You need a short 16mm dogbone wrench with a 3/8 universal to access top bolt , remove both bottom bolts (4), and with engine supported from below push engine to left or right while removing mounts
|
#3
|
||||
|
||||
Thanks for the tip
Nulu.. Thanks for the tip. do I still need to remove the exhaust pipe from the manifold on the drivers side to have room to extract the mount once disconnected?
__________________
Jeff '87 300E '92 400E '06 ML350 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|