Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > ML, GL, G-Wagen, R-Class, Unimog, Sprinter

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-30-2014, 12:04 AM
Registered User
 
Join Date: Apr 2006
Posts: 104
Control arm or wishbone wear on tierods front and rear tire upper control arm/wishbon

Hi there. w163 Ml 320 2002 manufactured in July of 2001

Anyone kind enough to provide me with a schematic or picture of the rear wheel assembly and front wheel assembly with torque spec would be greatly appreciated.
And any useful tips on how best to ....... even further appreciated
Problem
1. It would appear that upon jacking the rear wheels and grabbing the tire at 12 o' clock position and pushing forward there is play in the upper wishbone in the rear nothing on the 3 and 9 position also no play with crow bar under the rear tire and pushing down on the crowbar in the ball joints.-- so I have to replace the upper wishbone or control arm I guess

2. In the front grabbing at 3 and 9 position play in the tie rod ends -- so I guess replace the front tie rod ends
(and nothing at 12 and 6 or crow bar under the tire a pushing down on the crow bar
no play)

To ADD: my discovery of the above was I received a complaint from the driver that at different speeds there would on an occasions be a vibration -- given the above is that a possible cause

The rear tire control arm comes as an entire unit?? and you cannot purchase the end rubber "tie rod bushings" ??
Reply With Quote
  #2  
Old 06-30-2014, 11:59 AM
Registered User
 
Join Date: Apr 2006
Posts: 104
No worries I got some HUGE assistance at benzworld.org
Thank you

Last edited by Smith007; 07-01-2014 at 08:29 PM.
Reply With Quote
  #3  
Old 07-01-2014, 08:30 PM
Registered User
 
Join Date: Apr 2006
Posts: 104
Left rear toe arm ball joint. I assume this is the correct name -- can someone send or post a picture and schematic thereon and the torque specs?
PLEASE
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page