|
|
|
#1
|
|||
|
|||
W164 Steering Rack Replace DIY
I have a leaking steering rack on my 2008 ML320 CDI. The dealer says it needs to be replaced and has estimated $3K for parts and labor. I would like to do it myself, however I can't seem to find a DIY on the subject. Has anyone out there done this job? Any recommendations, any links to any DIYs on this topic?
Thanks in advance!
__________________
1987 560SL - 95K 1996 E300D - 183K 1997 E300D - 162K 1982 240D - 160K |
#2
|
|||
|
|||
Not a fun job, the front differential is in the way and has to come out first.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#3
|
|||
|
|||
Subframe has to come down, which supports the engine so engine must be supported first. Then it is pretty easy...
There are parts you can change on the vehicle if its leaking from the input seal (not the sides). |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|