|
|
|
#1
|
|||
|
|||
Press in ball joints in MA
Can anyone in central or eastern Massachusetts recommend an independent Mercedes repair shop who will press in ball joints into the steering knuckle of my 84 300TDT, and be reasonable about it? I would like to bring just the steering knuckle, with old ball joints already removed, with the new ball joints and have them press them in.
It seems that nowadays, too many shops either don't want to look at you for this type of work, or they want to charge upwards of $150 for this work. Thanks, Mark
__________________
1984 300TD Wagon, 407,800 mi (current daily driver) 1985 300DT Sedan, 330,000 mi (gone to that great autobahn in the sky) |
#2
|
||||
|
||||
Why not just do it yourself? The rental tool kit from autozoo did the trick for me, just make sure you are applying pressure to the lip only. A little dry ice doesnt hurt either.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#3
|
||||
|
||||
Quote:
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John |
#4
|
|||
|
|||
Bill French of Frenchies in Essex does stuff like this I think. Leave a message and he'll call you back.
978-768-7815 153 Western Ave, Essex MA 01929
__________________
_____________ 85 300D 180k |
#5
|
||||
|
||||
Find an Automotive Machine Shop!
I have normally gone to a NAPA with a machine shop to have this work done. I bring them the spindle and they take out the old bj and put the new one in. Last time, they charged me $15 each for the work. that was 2 years ago.
Machine shops such as NAPA's are equipped with the right equipment for this kind of work and they do quite a bit of it. On my first time, I rented the BJ press but its a PIA to do the work with a hand tool like that. For the price of letting them do it, its well worth it. Also, when doing struts, have machine shops do it too. Forget renting spring compressors.
__________________
the sooner you start... the sooner you'll get done If it ain't broke, don't fix it.. Its always simpler to tell the truth... 2007 Honda Accord EX 2007 Honda Accord SE V6 96 C220 97 Explorer - Found Another Home 2000 Honda Accord V6 - Found Another Home 85 300D - Found Another Home 84 300D - Found Another Home 80 300TD - Found Another Home Previous cars: 96 Caravan 87 Camry 84 Cressida 82 Vanagon 80 Fiesta 78 Nova Ford Cortina Opel Kadet 68 Kombi Contessa |
#6
|
|||
|
|||
You could try calling Ed Owen, he's in Waltham. I'm sure he could at least give you a thought on cost. His facility is 1st rate, really!
(781) 642-0667
__________________
1992 500SEL 25K 1995 E320 40K 1995 SL600 120K 2002 JX8 Sport 43K 2005 Volvo S40 95K 2006 Isuzu NPR 304K (Frankencamper) 2007 Crown Victoria 150K 2014 Smart Electric 20K |
Bookmarks |
|
|