|
|
|
|
|
#1
05-07-2006, 01:02 PM
|
|||
|
|||
|
126 rotor replacement; missing pages from my shop manual
I've had some vibration from my front brakes for a while, and decided to replace the rotors and pads. Problem is, my 126 manual (on CD) is missing any details on removing the rotors. Is there a bolt to remove so I can pivot the caliper and pull the rotor? I'm sure it's simple once you've seen it, but I hate to guess on brakes.
Tim K '89 300 SEL (original valve seals) 
|
|
#2
05-09-2006, 09:06 PM
|
||||
|
||||
|
I replaced the rotors and pads on my 126 a year or so ago and I had to take the calipers off and hang them up with a wire like in most rigs. I used the Haynes 123 manual for help. Oddly, Haynes didn't print a 126 manual.
 I believe the caliper had the standard two bolts that I had to removePS: might get more response to this over on tech help.
__________________
1986 300SDL, 362K 1984 300D, 138K Last edited by cmac2012; 05-09-2006 at 10:02 PM.
|
 |
| Bookmarks |
|
|
Linear Mode
