how to 'mothball' a brake caliper for storage
I am parting out a 300SD and thinking i would like to save the brake calipers for the day that I want to put them on the 240D.... but last time I pulled some rear calipers off they siezed up in a matter of weeks...
two questions, Is there any way to mothball a brake system so it does not rust when apart, (could I flush it with WD-40? except that is probably bad for the seals..) is there any repair to a caliper that has gotten stuck.. and once it is stuck, is it worth saving or will even a rebuilder of brakes systems turn it down? |
If the piston moves freely, I would maybe try to dump some WD-40 or some Liquid Wrench down inside. Or you could pop the pistons out and give everything a heavy dose of the above liquids and put it in a zip lock bag.
|
Don't use ANY petroleum lubricant. That includes both WD-40 and Liquid Wrench. You will ruin the seals.
Ensure that the dust shields are in place, fill it with clean brake fluid and plug the hole. |
Probably a good idea, but I have a bunch that I just threw in a drawer and they seem to be fine whenever I need one.
Tom W |
Quote:
If the piston is stuck, you'll need to force it out with the vehicle hydraulic system. Whether it's rebuildable or not will be determined by the condition of the piston(s). The rebuilder will never turn it down unless you fracture the caliper...........they don't even look in the box in most cases. |
Ok, So it sounds like I can pull them off, and if they are any good, they will be ready for service next summer.. with out any heroics on my part.. That is good news.. and I am glad I asked, as I was going to try to put some kind of preservitve in the system... now I wont do it..
|
All times are GMT -4. The time now is 02:47 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website