Mudflaps
Hey Everybody, Anybody know what a good source for MB mudflaps is.I need a set for a 96 E300 D. Thanks
|
Save a bit of money and install them yourself...if they are OEM, no drilling would be required.
Wouldn't think the job would be too hard? |
Thanks for the reminder! After reading this I ordered a 2 sets of mud flaps (front and rear) for my ’92 400E from Clair Parts, 1-800-354-5100. The cost is about $60 + shipping. I previously installed 2 sets on my 300TE in about 5 minutes per corner. They are made for the vehicle and essentially clamp on.
Regards, |
Thanks
Thanks to all. I didn't think that tha dealer would have them. Thanks again, Burgenlander
|
The best laid plans…
As a follow up, I received the mud flaps, installed them with only about 1.5 hours worth of hed-ache, only to find that the G&^%$#mn front flaps rubbed due to the wide 16” tire wheel combo on the 400. Oops! The back flaps work and look fine. So, anyone want a set of factory front mud flaps for a w124 or w210?? They have about 9 miles of use on part of one dry day… |
Do the flaps follow the contour of the fender lip WITH the lower quarter plastic cladding? That is what has kept me from putting any on my W124...
|
G
Mostly, yes they do. The bottom of the flaps flair out a bit. I can send you a couple of pix if you give me an address. I tried to post here but don’t know how to save the pix so as to require few enough bytes to fit the board’s requirements. |
Hi Tracy- I'd be interested in the W124 mudflaps...
I have a couple of long road trips planned this December in my W124s and if they are easy on/ easy off, it'll be a nice insurance policy/// let me know what you're asking for them! tks-fad |
How about $15 + postage for the pair OBO. I paid 25 plus postage
Cheers |
price sounds very reasonable...and I'm interested
would you kindly send pic to fulgence.dulay@uboc.com tks-fad |
I'm considering buying some mudflaps... does anyone have pictures of them installed, preferably on a 1994-1995 W124?
Ty |
id love it if you could send some pictures to me at
estarr@starmail.com i want some for my 1985 300TDT, or perhaps it would be easier just to post them here? thanks eric |
All times are GMT -4. The time now is 04:37 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website