|
|
|
#1
|
|||
|
|||
need help with my "oil burner"
Not the MB or the TDI, but my home oil burner. About 20-30 seconds after it starts to run the flame will go out for 5-10 seconds then it will reignite. Then while it is running it sound like it is "missing". I changed the main filter and cleaned the filter in the pump. I also installed a new nozzel and cleaned the "eye". Anyone have any ideas? It is a Beckett model AFG.
__________________
Thank you, Jay 83MB 300D 241K "The silver coffin" 10 Prius lll 1K 95 MB E300D 120K Mable 02 Saab 9-5 Areo 131K Cannondale SR500 www.thecornerstonefamily.org/ |
#2
|
||||
|
||||
I have heard of this problem before and I believe the problem was the ignitor gap was not correct. I have never had a house with that kind of heating system though.
Good Luck! Adam
__________________
Current Stable: 01 ML55 AMG 92 500E (a few mods) 87 300E (lots of mods) 00 Chevy 3500HD Diesel Box Truck 68 18' Donzi Marine 06 GT i-Drive7 1.0 Mountain Bike (with GPS!) PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320 |
#3
|
||||
|
||||
i have that problem right now and my maint guy says that the fuel line is dirty and needs to be "blown out". he says it is no big deal...
__________________
joE 1993 300e-2.8 - gone now <sigh> "Do not adjust your mind, it's reality that's malfunctioning" http://banners.wunderground.com/bann...L/Key_West.gif |
#4
|
|||
|
|||
Thanks, gentlemen. Adam, I will move the electrodes closer and see if that helps.
Joe, is it the fuel line from the tank that you are talking about or the one that goes to the nozzel?
__________________
Thank you, Jay 83MB 300D 241K "The silver coffin" 10 Prius lll 1K 95 MB E300D 120K Mable 02 Saab 9-5 Areo 131K Cannondale SR500 www.thecornerstonefamily.org/ |
#5
|
||||
|
||||
from the tank before the filter. i have no idea how they "blow out the line"...
HTH
__________________
joE 1993 300e-2.8 - gone now <sigh> "Do not adjust your mind, it's reality that's malfunctioning" http://banners.wunderground.com/bann...L/Key_West.gif |
#6
|
||||
|
||||
you could try flushing the lines with denatured alchohol,, not the pump though, it may cause adverse effects.
|
#7
|
||||
|
||||
wow, thank you so much
|
#8
|
|||
|
|||
oops. just noticed we've been trolled.
|
#9
|
||||
|
||||
Quote:
|
#10
|
||||
|
||||
I don’t follow. I don’t see conclusive evidence of that.
manuelcherri may have been dealing with the same issue and found the thread on a search.
__________________
1986 300SDL, 362K 1984 300D, 138K |
#11
|
||||
|
||||
21 years old.
__________________
1986 300SDL, 362K 1984 300D, 138K |
#12
|
||||
|
||||
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1998 E320 "Oil Sensor Defective" | ckNSX | Tech Help | 1 | 03-11-2003 12:20 PM |
What is "Oil Filter STand Gasket? - Ordering parts for 1st oil change on 88 300SE | Ron Brooks | Tech Help | 5 | 08-19-2002 10:55 AM |