|
|
|
#1
|
||||
|
||||
Video DIY tutorials on PeachParts
Hello everybody!
A long time ago I called Whunter to discuss setting up an operation in the lines of what Kent Bergsma is doing with **************. That would include video tutorials and a more dynamic parts section for DIY jobs at all skill levels. However, Whunter does not have much spare time with his job in addition to his online presence in the forum. What are your thoughts or suggestions? How much of a fee would you pay for having video tutorials and parts kits available? I do have all the equipment to make it possible. In short, how can we make this work? Whunter, hop in, too!
__________________
[GONE] - 1995 Mercedes E300 Diesel - 130k miles - Smoke Silver (702) over Mushroom leather (265) - Bladder blasting, coast-to-coast work machine. |
#2
|
||||
|
||||
This would only work if the intro for each video had Roy making fireballs with a torch.
__________________
Chad 2006 Nissan Pathfinder LE 1998 Acura 3.0 CL OBK#44 "Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.) SOLD 1985 300TD - Red Dragon 1986 300SDL - Coda 1991 - 300TE 1995 - E320 1985 300CD - Gladys |
#3
|
||||
|
||||
Honestly I say we just come up with a partnership of sorts with Kent Bergsma as his compilation of videos are already extensive, well done, and covers a good number of topics. I've used a few of his recommendations before and they all echo what i've read here on the forum. If anything it would save a lot of time with duplicate threads.....
For example I checked his page again and i'm happily watching the trim video A Solution to Restoring Oxidized ANODIZED Aluminum Trim on Older Mercedes Part 1, 2 and 3 - YouTube At the end of the day we are all working towards the same goal, preservation.
__________________
1982 300GD Carmine Red (DB3535) Cabriolet Parting Out 1990 300SEL Smoke Silver (Parting out) 1991 350SDL Blackberry Metallic (481) "The thing is Bob, its not that I'm lazy...its that I just don't care." |
#4
|
|||
|
|||
When Roy came down for the Tech Session back in '07 I think it was, we had a videographer record some various things. I did an IP Timing session and one on how to put a harmonic balancer in place without damaging the crankshaft.
Roy did valve adjustment and a number of other things. Unfortunately it turned out that the video's were unusable. It was sad too, because there were LOTS of things covered in those two days.
__________________
2001 SLK 320 six speed manual 2014 Porsche Cayenne six speed manual Annoy a Liberal, Read the Constitution |
Bookmarks |
|
|