PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Off-Topic Discussion (http://www.peachparts.com/shopforum/off-topic-discussion/)
-   -   Moldable plastic (http://www.peachparts.com/shopforum/off-topic-discussion/346481-moldable-plastic.html)

TnBob 11-19-2013 08:43 PM
Devcon also makes a 'hard as steel' material. Check out Devcon Metal Patch and
Fill.

super SEC 11-19-2013 09:20 PM
Quote:
Originally Posted by panZZer (Post 3241772)
You are missing the point entirely--this is for temp parts mostly that can be recycled and used over and over.
No, you were missing to whom I was addressing my comment. Look at the post above mine.

spdrun 11-19-2013 09:35 PM
This is not a new product -- it was sold as "Friendly Plastic" in the 1980s -- I used it for modelling.

Diesel911 11-20-2013 09:48 PM
Quote:
Originally Posted by panZZer (Post 3241772)
You are missing the point entirely--this is for temp parts mostly that can be recycled and used over and over.
Yes, but it is easy to see that if it had a higher melting point like 250-275 degrees F it would be more useful for other things.
It could still be re-melted and reused; you would just need something like a Lead Pot that people who make their own Bullets use to re-melt it.


All times are GMT -4. The time now is 05:20 AM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website