|
|
|
#1
|
|||
|
|||
Drill guide - centering a drill bit with a socket
I needed to drill an exhaust manifold bolt or stud. Turns out someone, previous owner, had started to drill it and it was off-center.
I looked around for something to hold the drill bit on center to start the hole. Some of my sockets have a smaller hole through the center and I found one to fit a drill bit. I shimmed the socket in the hole with paper and the socket held the drill bit on center to drill a pilot hole. Drilled to size and tapped. Worked good, Jeep sounds great, better than ever. |
#2
|
|||
|
|||
Quote:
|
Bookmarks |
|
|