|
|
|
#1
|
|||
|
|||
Worth reviving 30 year old RC10?
Is it worth getting a new control system and battery pack for a ~30 year old RC10 vs getting something that sells for $75 today? Are there modern control systems that will hook up to vintage steering gear? I assume modern control systems can drive the motor.
Sixto 98 E320s sedan and wagon |
#2
|
|||
|
|||
Not familiar with an RC10 (I recognize the name though...)
I can say that Servo form factors have not changed much - choices/sizes and selection have improved iirc over the years. If it were me - I'd take the opportunity to find a local RC hobby shop (Cincinnati has a few) - the guys behind the counter there would *love* to see some old machinery...and sell you parts to make it work if they exist. For reference - If its an RC car - Im not sure there is any quality in a machine costing less than $200 new (with electronics). I'm open to criticism here. (tough to go wrong with a 1/16th traxxas -anything) -John
__________________
2009 Kia Sedona 2009 Honda Odyssey EX-L 12006 Jetta Pumpe Duse (insert Mercedes here) Husband, Father, sometimes friend =) |
#3
|
|||
|
|||
Some of the older stuff brings some money. Same as above, not really knowlegable about RC10 cars. I fly planes.
As to radios, they have taken a quantum leap since the mid 90's. They've taken a quantum leap since the last 5 years. Sort of think about computers in from 2000 to 2010. The 2.4 stuff is very good. The servos have improved a bunch. I'd look into servos specifically for cars. The gears for cars take more shock, so they do not strip as easy. I would think under $100 for the lower cost radios. I'd look into a brushless motor and speed controller. Again, they have come down a bunch. Also, look at Lithium batteries. A lot more charge and lighter weight. I'd probably search the net and see what others have done with RC10 cars. |
#4
|
||||
|
||||
What is a RC10? What is this thread about???
|
#5
|
|||
|
|||
#6
|
||||
|
||||
Interesting.
Thx. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|