|
|
|
#1
|
|||
|
|||
190E 5 speed. swap please help !
i am swapping in a 5 speed stick in place of my old 4 speed auto in my 1988 190E 2.3 . my question is what should i do with the kick down plug and the gear selector sensor plug that hooked to my auto? they both tie into to the main wiring harness . before i install the 5 speed i want to make sure that everything will work as it should . any advise at all would help greatly . thank you .
__________________
mercedes = performance with lots of comfort ! |
#2
|
|||
|
|||
Just disconnect the auto trans wiring harness..
You will need to connect permanent jumper on the 2 wires for the safety neutral switch & if you want back-up lights connect the shifter switch
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|