|
|
|
#1
|
|||
|
|||
CIS Injectors all the same on MB?
I was planning to get a spare set of bosch injectors for my M104 3.4 amg. Most stores online states that those are the same for a very wide range of mercedes cars running cis.
But i do remember that i once tried to swap the injectors from a 420 SEL 1989 onto my 300e M103 1991 and it didnt fit. it has a different pattern on the screw side (picture attached) anyone to confirm? |
#2
|
|||
|
|||
Yes there are two different threads (fine and coarse) for the injectors.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#3
|
|||
|
|||
thats what i thought, but is there any difference in the part numbers? or i have just to ask the sellers directly?
|
#4
|
|||
|
|||
Yes the numbers are different. I don't know them off the top of my head but your supplier should be able to look up the correct injectors for your application.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#5
|
|||
|
|||
I wish he does!
ill end up finding it somewhere |
#6
|
|||
|
|||
I did my homework
Coarse thread: (usually cheaper than the fine ones, lowest price found around 25$) Mercedes part number: 0000785623 Bosch part number: 0437502047 Fine thread: (the expensive one, lowest price found around 35$) Mercedes part number: 0000785823 Bosch part number: 0437502054 |
#7
|
|||
|
|||
Price difference is irrelevant once you figure in cost of changing the lines if you change to nonstandard (for your car) injectors. This is likely difficult as there's the connection at the other end of the line to consider as well.
__________________
Kent Christensen Albuquerque '07 GL320CDI, '10 CL550. '01 Porsche Boxster Two BMW motorcycles |
#8
|
|||
|
|||
I am not considering changing the lines at all, never said anything about it. My previous post was for order of information for other forum members
|
#9
|
|||
|
|||
I believe the injectors have different opening pressures as well
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|