just normal on/off switch

__________________
W123 - M111+Turbo

Hello there ...

I did put the kick down switch on the pedal and put a second on off switch so I can have on as much as I like

This didn't change anything

1st gear changes on its own at 40km when shifter is at 2 position

Can anybody pleeeeease help me keep the first gear till the end and keep it?

Please help

Hi there ...

I tryied removing the springs from 2 valves that the turbobandid told me
The guys from turbobandid REALLY helped me!!!
Huge thanx for that guys

But still can't hold first gear till the redline

Can anybody help me please ?

what is your redline? did you try it with launch control?
i have a 722.4 transmission which i think it's similar to 722.3, i can hold the first gear to the redline which is 6000rpm, but i don't know at which speed as i dont have a speedometer at the moment.
Tomorrow going to try with the speedometer app on my phone, will post my results.

__________________
W123 - M111+Turbo

I have 8000rpm redline but it changes to second at 4000-4200
About 40-45km

Do you have your foot all the way depressed to the floor. Full throttle? If so then does it shift at the same point in other gears?

if you put in D with full throttle at what rpm does it shift? are you sure when you move the selector down it goes to 2 ?
maybe try to put it in 2 then go to D then again to 2

__________________
W123 - M111+Turbo

Hi there..

Thanks for the replies

I have tried everything but nothing change

When WOT it goes 40-45 km
When not wot 30-35

Gear changes in other gears at different points

I want the first gear to go to the redline when the selector is in 2

Sorry for the bad English :/

any update on this?
Have you tried playing with bowden cable to change shift point?
Maybe your last solution is to change the gearbox

__________________
W123 - M111+Turbo

Hi there...

Am going to a mercedes specialist to adjust the Bowden cable and see if am doing something wrong

No money to change gearbox again..
I ll stay with this

Not bad to change to second at 40km because then it starts spinning and second comes to spin all the way till 125km

hI THERE....

Am building a new motor cause i had some gasket issues and make it with fire rings so i can pull 2,5bar without problem....ass i was told

I want to ask if u can help me.....i want to launch harder
Can i put another converter that stall higher?
Does anyone know where can i fix my converter to have a higher stall (europe)

please help....

Turbo bandit were making higher stall converters

__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!

they want 2000euros

Yep.

Nobody said it would be easy or cheap!

__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!