|
|
|
#1
|
||||
|
||||
M103 Intake Upgrade
Where is this intake elbow available? 300SL? This would be a good way to start off the ram air system! Your comments will be greatly appreciated.
Thanks! Adam
__________________
Current Stable: 01 ML55 AMG 92 500E (a few mods) 87 300E (lots of mods) 00 Chevy 3500HD Diesel Box Truck 68 18' Donzi Marine 06 GT i-Drive7 1.0 Mountain Bike (with GPS!) PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320 |
#2
|
||||
|
||||
how about the one from a c 280 or an e320? m104 rninge, with the different intake.
alon
__________________
'92 300CE - Sold 2004 C240 - 744 - C7 Wheels - Android Radio 2002 C320 - 816 - Sport Wagon |
#3
|
|||
|
|||
check out what 2phast did over at benzsport.com
|
#4
|
||||
|
||||
Thanks for your suggestions, I am looking for a very clean looking system. I believe this intake elbow will fit my application perfectly. The C280 or E320 Intake tube would have to be cut up to work properly.
Adam |
#5
|
||||
|
||||
Where is the "breather hose" connected to?
The one from the valve cover to the air intake.
__________________
J.H. '86 300E |
#6
|
||||
|
||||
No, the piece connected to the breather hose. The large black intake elbow that sits on top of the mass air flow meter.
|
#7
|
|||
|
|||
what is the little white plastic hose that comes off the elbo hose mine is dissconnected maybe i dissconneteced it is it a sensor hose? where does it go in? do i need it?
|
#8
|
||||
|
||||
John
that might be a vacuum hose. Alon
__________________
'92 300CE - Sold 2004 C240 - 744 - C7 Wheels - Android Radio 2002 C320 - 816 - Sport Wagon |
#9
|
|||
|
|||
dood ok , LOOK @ the Black hose that connects to the top of the airbox and to the engine/valve. off of the VALVE. there is a small very skinny WHITE almost CLEAR plastic hose ........If it were a vaccum must it be pluged in some where right now mine is out what should i do? i cann't remmeber if i pulled it out or already was out or where the hell it goes thanks
|
#10
|
||||
|
||||
Anyone know where these come from??
|
#11
|
||||
|
||||
It goes to the fuel pressure regulator!
__________________
J.H. '86 300E |
#12
|
|||
|
|||
adam
Audi and vw used cis and cis-e fuel management systems. I have seen different rubber top hats off of those cars that would fit on a benz. I took the one off of my 87 jetta and it fit on my 93 190e. Not seen the hard one like your picture though. Will do a salvage yard run this weekend to look for one.
Thanks for the idea. Dan |
#13
|
|||
|
|||
checkout this link for ideas.
http://www.fastvws.com/acatalog/FASTADDICTION_com_Intake_Parts___Upgrades_5.html look for the intake boots. |
#14
|
||||
|
||||
Dan,
WOW! Thanks for the info! Adam |
#15
|
|||
|
|||
The intake on the fuel distributor is larger on the vw. I had to use the gasket off of the 190e cleaner to get a tight fit. But it looks more "factory" than some of the others I've seen. I haven`t completed one yet as I am still keeping an eye out for a better intake boot in the junkyards. I need the one on my Jetta, doesn't run to good without it
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|