|
|
|
#16
|
|||
|
|||
Not sure if I was clear enough. I'm using individual flanges not one flat bar same as the original headers though you probably figured that out by the price.
The bar has to be cut between each outlet for expansion anyway so we decided to go this way. I can ask Mark how much for a flat bar if you wish. |
#17
|
||||
|
||||
Yes. So do you mean 20$ per cylinder?
__________________
WARNING!!! VINTAGE MERCEDES MAY MULTIPLY UNCONTROLABLY!!! I have tons of Sl/Slc parts w108 w111 w126 and more. E-mail me with needs BirchsgarageMB@gmail.com |
#18
|
|||
|
|||
Correct, or $100 for a set of 6. If you mean yes for a flat bar quote, you would have to supply him with all the relevant dimensions, port size, spacing etc. or e-mail a .DWG file he can use. He has a $100 minimum setup fee if he makes the file. You probably have someone local who could do the same thing.
|
#19
|
||||
|
||||
No individual is fine. Really a two or
three piece flange would be better for longevity though.
__________________
WARNING!!! VINTAGE MERCEDES MAY MULTIPLY UNCONTROLABLY!!! I have tons of Sl/Slc parts w108 w111 w126 and more. E-mail me with needs BirchsgarageMB@gmail.com |
Bookmarks |
|
|