|
|
|
|
|
#1
05-25-2020, 03:01 AM
|
||||
|
||||
|
M111 kompressor flywheel balance
Anyone know for sure that the m111 is a neutral balance flywheel? I've been assuming it is along with all the m103 m104 om603 606. I got my 6 speed and all the parts today at the pull a part for $210!!!. And I'll be damned if I didn't forget to mark tdc on it before I pulled it. On the plus side the flywheel looks like it's almost new, still has machine marks on it and alomost no heat discoloration at all on either pressure plate of flywheel. Its going on my om603. I also forgot to grab the starter although I'm pretty sure the auto and manual 603/103 architecture use the same one.
Sent from my SM-J737A using Tapatalk
__________________
WARNING!!! VINTAGE MERCEDES MAY MULTIPLY UNCONTROLABLY!!! I have tons of Sl/Slc parts w108 w111 w126 and more. E-mail me with needs BirchsgarageMB@gmail.com 
|
|
#2
05-25-2020, 08:33 AM
|
|||
|
|||
|
Doesn’t it only go on in one orientation?
Here’s a w124 m104 flex disk on a custom flywheel. They have three holes on one of the sides of the crank bolts.  Sent from my iPhone using Tapatalk
__________________
Past mb: '73 450sl, '81 280slc stick, '71 250, '72 250c, '70 250c, '79 280sl, '73 450sl, parted: '75 240d stick, '69 280s, '73 450slc, '72 450sl,
|
|
#3
05-25-2020, 01:54 PM
|
||||
|
||||
|
I'm not sure if it has a dowel pin hole or not. I'll. Have to look at it. The m117 has one bolt hole 2mm off from the rest, not sure about these.
Sent from my SM-J737A using Tapatalk
__________________
WARNING!!! VINTAGE MERCEDES MAY MULTIPLY UNCONTROLABLY!!! I have tons of Sl/Slc parts w108 w111 w126 and more. E-mail me with needs BirchsgarageMB@gmail.com
|
 |
| Bookmarks |
|
|
Linear Mode
