|
|
|
#1
|
|||
|
|||
97 S420 - coolant sensor location(s)?
I have a 1997 S420 - I ordered a new coolant sensor (just as a precautionary measure) - but it's a single pin. the one on top of the intake manifold is four pin connector - am I missing something? or do I just have the wrong part? Maybe there are two?
|
#2
|
||||
|
||||
Low coolant and Coolant temp TWO
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#3
|
|||
|
|||
Single pin is coolant sender for the temp gauge.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#4
|
||||
|
||||
I do not think in '97 there are two anymore. I think it is just the single 4 pin one. ME reads the sensor and sends over CAN to other modules.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|