|
|
|
#1
|
|||
|
|||
Hi, everyone. I really want to find out two things about my car. I have a 3.2 93 300E
I wanted to know if the computer is turnable. I went to a motorsports shop around the Seattle are ( Car Nutz ) and one of the representive there said the Bosch motronic in the car are no rurnable, therefore no chips for the 300E. I want to know if that is true. If what the guys said wasn't right I would want to know who makes chips for the 300E. Any trips or concerns will help Thank you very much for your help and it is greatly apperciated. Peter regards |
#2
|
|||
|
|||
Do you have the individual Bosch #? The ignition module should have a specific code on it. Approx 9-10 characters long. I don't know about the 6's but the 8's usually start with 0280.xxx.xxx or 0260.xxx.xxx. If it is in the same spot as the 8's it is the 3rd module from the left.(in the black metal box that houses the computer modules) To my knowledge the 3.2 I6 was able to be tuned. Yours may be microprocessor rather than Eprom based...in which case it isn't as easy as just popping in a chip. You would have to send the "brain box" off to be reprogrammed or install an aftermarket computer module. If you can give me the Bosch # and the build date I will check around for you.
Lee |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Austin, Texas shop info needed. | Mack | Diesel Discussion | 6 | 10-05-2004 09:24 AM |
Transmission swap info needed | M D Nugent | Tech Help | 0 | 07-27-2002 01:50 PM |
1972 220D Info Needed! | Mario Slipac | Tech Help | 2 | 07-03-2002 11:43 PM |
Part # or Info needed | Big Bowser | Tech Help | 2 | 06-06-2002 09:11 AM |
Info needed 1994 W124 Headlight on 1990 | claudel | Featured Cars | 1 | 06-04-2002 10:10 AM |