|
|
|
#1
|
|||
|
|||
om617a diesel swap project
howdy everybody thanks for letting me be a member of the forum.
I got a hold of an OM 617 A and will be putting it into my 1978 International Harvester scout traveler and I was wondering if this is a good place to start with some basic questions on hookups and other information that I will need to get it going or if there's a better place in the forum to have that type of questions? Thanks by the way already have an adapter for a 700r4 which is already in the vehicle. I've also removed the egr system. I understand that there is a vacuum solenoid for the fuel shut off but I need to know if there's any other vacuum lines that are necessary for the operation of the engine. |
#2
|
||||
|
||||
om617a diesel swap project
To the archives you must go. There's a section with links by category. Stickies for all things.
On the pelican parts side there is a lot of info as well. Goto the car that your motor came from. There's also a few threads going on with swaps. Another international (older) and a toyota truck. I believe one of those just discussed this. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|