Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Search Forums

Showing results 1 to 30 of 104
Search took 0.02 seconds.
Search: Posts Made By: jerryb
Forum: Mercedes-Benz SL Discussion Forum 09-19-2003, 09:27 PM
Replies: 3
Views: 1,141
Posted By jerryb
there are some screws under the header trim panel...

there are some screws under the header trim panel so that has to be removed. The rear view mirror is removed by pulling back firmly.
Forum: Diesel Discussion 08-14-2003, 09:28 PM
Replies: 8
Views: 2,311
Posted By jerryb
At the top where the rubber cup goes, there is a...

At the top where the rubber cup goes, there is a piece like a pipe that holds the threads for the long bolt that holds the bushing. That "pipe" has to fit down into the bushing a little and can be...
Forum: Diesel Discussion 08-12-2003, 08:53 PM
Replies: 8
Views: 2,311
Posted By jerryb
There is a cup on the top. Check on the Ritter...

There is a cup on the top. Check on the Ritter Easly site there is instructions on how to do it with an allthread rod and hyd. jack.
Forum: Diesel Discussion 08-11-2003, 09:32 PM
Replies: 8
Views: 2,311
Posted By jerryb
When I got them from the Dealer I got 38-39-40...

When I got them from the Dealer I got 38-39-40 &41, I have done my sl, a cd and my sd, all the same, not a big job.
Forum: Diesel Discussion 08-08-2003, 10:05 PM
Replies: 17
Views: 5,189
Posted By jerryb
It helps reduce the amount of oil that gets blown...

It helps reduce the amount of oil that gets blown into the breather hose that goes to the air cleaner and then back to the pan. If you do a search you should find info on it and resealing it with...
Forum: Diesel Discussion 08-04-2003, 09:12 PM
Replies: 4
Views: 796
Posted By jerryb
You could put on an after market cruise for under...

You could put on an after market cruise for under $100. Or you could replace the actuater $200, the controler $250, and the switch $40. Or find a brick $0.
Forum: Mercedes-Benz SL Discussion Forum 07-11-2003, 08:14 PM
Replies: 11
Views: 4,303
Posted By jerryb
Darrel, you have the right part but it's not a...

Darrel, you have the right part but it's not a monovalve, that came in later cars. If it leaks you will have to get a new heater valve, the vaccum valve and the water shut off come as 1 piece and are...
Forum: Mercedes-Benz SL Discussion Forum 07-07-2003, 07:54 PM
Replies: 11
Views: 4,303
Posted By jerryb
Under the hood, center of the firewall. Follow...

Under the hood, center of the firewall. Follow the hose. There is a vac. controled heater valve, just ty it off in the closed position.
Forum: Diesel Discussion 06-29-2003, 10:28 AM
Replies: 7
Views: 1,158
Posted By jerryb
I have used quite a bit of dyno-mat type stuff on...

I have used quite a bit of dyno-mat type stuff on my dodge diesel, 24 sq. ft. I also sprayed the underside of the floor with a liquid sound deadner that was like an undercoat. I used both dyno-mat...
Forum: Diesel Discussion 06-23-2003, 09:00 PM
Replies: 15
Views: 2,378
Posted By jerryb
I just went through this about 6 weeks ago. My...

I just went through this about 6 weeks ago. My advice, buy the M.B. lines and undo the motor mount to install.
I was determined To have hoses made and did get it done, but it cost almost as much as...
Forum: Mercedes-Benz SL Discussion Forum 06-22-2003, 09:58 PM
Replies: 4
Views: 1,647
Posted By jerryb
Your dealer should have some that are chain...

Your dealer should have some that are chain reinforced, they look just like the standard donut.
Forum: Diesel Discussion 06-16-2003, 09:10 PM
Replies: 2
Views: 1,300
Posted By jerryb
This is common, do a search and you will find...

This is common, do a search and you will find directions to replace that fuse by running a jumper wire and a 30 amp blade fuse holder. I need to do mine also and I have looked at the instructions on...
Forum: Tech Help 05-23-2003, 08:46 PM
Replies: 4
Views: 1,046
Posted By jerryb
There are 2 sensors, if I remember right 1 for...

There are 2 sensors, if I remember right 1 for temp and 1 for pres.
Jerryb
Forum: Mercedes-Benz SL Discussion Forum 05-11-2003, 12:16 PM
Replies: 2
Views: 1,526
Posted By jerryb
George, Have you checked your gas mileage after...

George,
Have you checked your gas mileage after your repairs?
I think mine is too rich also, it smells rich and the tailpipe gets black but it runs good and the plugs are tan. I have played with...
Forum: Mercedes-Benz SL Discussion Forum 05-10-2003, 04:51 PM
Replies: 8
Views: 1,352
Posted By jerryb
The control valve for hot water is under the hood...

The control valve for hot water is under the hood on the fire wall. The valve may be bad or you could have a vacuum leak.
You can unhook the linkage and tie it closed.
Forum: Diesel Discussion 05-07-2003, 09:10 PM
Replies: 16
Views: 4,619
Posted By jerryb
Find another alignment shop that knows how to do...

Find another alignment shop that knows how to do a M.B.
There is a plug on the bottom of the steering sector that gets pulled, then as the wheel is turned you can feel a dimple with a small phillips...
Forum: Mercedes-Benz SL Discussion Forum 05-04-2003, 12:08 PM
Replies: 1
Views: 1,026
Posted By jerryb
Remove the seat back, two screws, and slide it...

Remove the seat back, two screws, and slide it down and out.
You will find a large nut to remove, and the arm rest will come out.
Forum: Mercedes-Benz SL Discussion Forum 04-28-2003, 08:05 PM
Replies: 13
Views: 3,273
Posted By jerryb
I've had problems with a after market fender, the...

I've had problems with a after market fender, the holes were off and the taper on the top needed to be reworked. Cheaper and better to use stock.
Forum: Mercedes-Benz Wheels & Tires 04-28-2003, 08:00 PM
Replies: 3
Views: 796
Posted By jerryb
Luke, Do you have 1? E-mail me if you do. ...

Luke,
Do you have 1? E-mail me if you do.
jerryb
Forum: Mercedes-Benz Wheels & Tires 04-27-2003, 01:37 PM
Replies: 3
Views: 796
Posted By jerryb
center cap

I need 1 center cap for an after market 14" wheel in the syle of the 15" '87 and up 15" flat faced stock wheel. Mine are chrome, made in Italy, with an 2 3/4 inch dia. chrome center cap. The cap...
Forum: Mercedes-Benz SL Discussion Forum 04-27-2003, 12:58 PM
Replies: 17
Views: 3,034
Posted By jerryb
Mines a 72 and the same as yours. The adjuster on...

Mines a 72 and the same as yours. The adjuster on the drivers seat does not hold on mine, it will adjust ok but after a couple of miles it will back as far as it will go. We also had an 99 Aurora and...
Forum: Diesel Discussion 04-24-2003, 08:50 PM
Replies: 6
Views: 1,140
Posted By jerryb
I can't remember where the strainer was but...

I can't remember where the strainer was but behind the rear seat back there is a plastic cap in the bulk head pop that off and remove the big nut and you can pull up the gauge tube etc. I also at the...
Forum: Diesel Discussion 04-17-2003, 09:14 PM
Replies: 9
Views: 1,579
Posted By jerryb
The first thing should be getting all the...

The first thing should be getting all the recomended service done, valve adjust, clean the boost sensor, etc. Then you could adjust the waste gate and the alda, but it will still be a dog.
Forum: Mercedes-Benz SL Discussion Forum 04-17-2003, 08:43 PM
Replies: 2
Views: 1,285
Posted By jerryb
My feet get hot also, but I thought it was from...

My feet get hot also, but I thought it was from the heater so I wired the valve shut because when you shut off the engine you lose vacuum and the heater valve opens. I still get some heat in the...
Forum: Diesel Discussion 04-10-2003, 09:26 PM
Replies: 4
Views: 692
Posted By jerryb
Dodge uses a bottle for the Cummins, it's not the...

Dodge uses a bottle for the Cummins, it's not the answer.
The vapor is oily and attracts dirt, it also smells. Get the new style hose and keep the plumbing inside the air cleaner housing and the...
Forum: Mercedes-Benz SL Discussion Forum 04-09-2003, 10:05 PM
Replies: 21
Views: 3,941
Posted By jerryb
If your car came with the flashlight you should...

If your car came with the flashlight you should be able to pull the glove box and find the plug, although after 30 years someone may have cut it off. If the car had one, there would be the push...
Forum: Diesel Discussion 04-06-2003, 07:53 PM
Replies: 2
Views: 1,342
Posted By jerryb
It's a vent. Not attached.

It's a vent. Not attached.
Forum: Diesel Discussion 03-16-2003, 12:05 PM
Replies: 10
Views: 1,205
Posted By jerryb
If it's not leaking, making noise, or vibrating I...

If it's not leaking, making noise, or vibrating I dobt it needs to be rebuilt. Double check the fittings and hoses, then try adjusting the waste gate, they seldom give problems and even a bad one...
Forum: Mercedes-Benz SL Discussion Forum 03-16-2003, 11:56 AM
Replies: 7
Views: 3,524
Posted By jerryb
I've not had a problem with my SL but my CD would...

I've not had a problem with my SL but my CD would do that.
I would have to turn the key hard to the left, slightly past the normal unlock position and push in the button at the same time.
There was...
Forum: Diesel Discussion 03-08-2003, 10:51 AM
Replies: 4
Views: 1,131
Posted By jerryb
where did you get the parts? The top rubber...

where did you get the parts? The top rubber should have come with the kit. If you drop the diff. mount it will all drop to give you room. The diff. mount should be changed, and it is a bear.
Showing results 1 to 30 of 104

 
Forum Jump


All times are GMT -4. The time now is 06:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page