Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Search Forums

Showing results 1 to 30 of 95
Search took 0 seconds.
Search: Posts Made By: djankov
Forum: Tech Help 07-11-2005, 12:38 AM
Replies: 12
Views: 1,155
Posted By djankov
I took out both springs and compared them next to...

I took out both springs and compared them next to each other. They appear identical and both have the part number 124-321-22-04. I swapped the left and right and reinstalled them with the 8mm pad on...
Forum: Tech Help 06-30-2005, 03:51 PM
Replies: 12
Views: 1,155
Posted By djankov
Thanks for the info sborg. I wouldn't be...

Thanks for the info sborg. I wouldn't be surprised if the shop tightened the control arms when the car was suspended.
I will post what I find.
Forum: Tech Help 06-30-2005, 03:34 AM
Replies: 12
Views: 1,155
Posted By djankov
Last weekend, I removed the right spring and...

Last weekend, I removed the right spring and checked the spring and spring pad part numbers. They are the same as the left ones. I replaced the 18mm pad with an 8mm pad. The height difference has not...
Forum: Tech Help 06-26-2005, 02:14 AM
Replies: 12
Views: 1,155
Posted By djankov
Today, I replaced the left spring with one from...

Today, I replaced the left spring with one from the dealer 124-321-22-04 (blue color code). The height difference is now only .75 in. I checked out the rubber spring pad and it was 124-321-11-84...
Forum: Tech Help 06-23-2005, 12:58 AM
Replies: 12
Views: 1,155
Posted By djankov
Hi jgl1, I cannot seem to find this PDF file...

Hi jgl1,

I cannot seem to find this PDF file on my 124 Service Manual :
Section 32-220 "Adjustment of Front Springs (Combination front springs - rubber mounts).

I have 32-200 Removing and...
Forum: Tech Help 06-22-2005, 03:06 AM
Replies: 12
Views: 1,155
Posted By djankov
I ordered the correct spring from a local dealer,...

I ordered the correct spring from a local dealer, which I will install this weekend(I bought the Mercedes spring compressor on Ebay). I also ordered the (8mm) shim as shown in the parts catalog. They...
Forum: Tech Help 06-18-2005, 03:58 PM
Replies: 12
Views: 1,155
Posted By djankov
Control Arms Replaced 87 300TD

I had an indy shop replace my control arms about 1500 miles ago, and now my new front tires are almost bald on the outside tread. Since they replaced the right side spring as well, I measured the...
Forum: Tech Help 03-10-2005, 02:20 PM
Replies: 14
Views: 4,354
Posted By djankov
I believe the connector is located about 10...

I believe the connector is located about 10 inches from the rear seat edge (or about 15 inches from the pump). I had to pry the carpet up with a stick to hold it while I located the wires. This was...
Forum: Diesel Discussion 03-09-2005, 03:29 AM
Replies: 1
Views: 1,360
Posted By djankov
Sounds familiar! Check out my post and see...

Sounds familiar!

Check out my post and see if it may apply.

http://www.peachparts.com/shopforum/showthread.php?t=50485&highlight=djankov
Forum: Diesel Discussion 01-02-2005, 03:26 AM
Replies: 26
Views: 2,375
Posted By djankov
gsxr, Do you have a part number for the...

gsxr,

Do you have a part number for the 126/603 (603.961) "gray" 105/120C switch?

Thanks,

1987 300 TD 203Km
1987 300D 187Km
2004 CLK 500...
Forum: Diesel Discussion 12-31-2004, 04:31 PM
Replies: 192
Views: 19,445
Posted By djankov
Delvac-1 in my '87 300TD and '87 300D. No idea...

Delvac-1 in my '87 300TD and '87 300D. No idea what they put in my '04 CLK 500 Cabrio. DOes anyone know what they use at the factory?

1987 300 TD 203Km
1987 300D ...
Forum: Diesel Discussion 08-01-2004, 06:07 PM
Replies: 14
Views: 2,733
Posted By djankov
Today I tested the A/C system again. With the...

Today I tested the A/C system again. With the engine cold, I measured the Ohms between the 7 terminal and ground ( had to removed the Kilma Relay) as mentioned by stevebfl in another thread ...
Forum: Diesel Discussion 07-30-2004, 10:36 PM
Replies: 14
Views: 2,733
Posted By djankov
Today I picked up my car (300TD) and the A/C...

Today I picked up my car (300TD) and the A/C worked for 10 minutes until I got on the freeway. Then it stopped. It never went back on, even after turning off the engine and turning it back on. I went...
Forum: Diesel Discussion 07-28-2004, 02:44 AM
Replies: 14
Views: 2,733
Posted By djankov
I bought the new Klima Relay and it fixed the...

I bought the new Klima Relay and it fixed the problem. I had cold A/C for about a month.
After that, a new problem developed and the A/C only worked when the engine was cold. It stopped working...
Forum: Diesel Discussion 06-03-2004, 11:19 PM
Replies: 14
Views: 2,733
Posted By djankov
I ordered a new Klima Relay. I will keep everyone...

I ordered a new Klima Relay. I will keep everyone posted!

1987 300D 186Km
1987 300TD 198Km
2004 CLK 500 Convertible 2Km
Forum: Diesel Discussion 05-30-2004, 11:08 PM
Replies: 14
Views: 2,733
Posted By djankov
W124 A/C Diagnostic

After not having A/C since I bought the car, I tried to diagnose why the A/C was not working on my '87 300TD. I went through the test procedure section A of "83-605 Checking compressor cutoff and...
Forum: Diesel Discussion 04-19-2004, 09:48 PM
Replies: 26
Views: 2,042
Posted By djankov
Turns out it was the pressure valve seals on the...

Turns out it was the pressure valve seals on the injector pump. See http://www.peachparts.com/shopforum/showthread.php?s=&threadid=89227

1987 300 TD 198Km
1987 300D ...
Forum: Diesel Discussion 04-19-2004, 09:36 PM
Replies: 25
Views: 4,211
Posted By djankov
I followed psfred's procedure and the leaks...

I followed psfred's procedure and the leaks stopped. However, I had a problem afterwards with the fuel line tubing going to the injectors. It seems, that I could not get some of them to seal on the...
Forum: Diesel Discussion 03-12-2004, 08:45 PM
Replies: 25
Views: 4,211
Posted By djankov
603 injection pump leaking

After wondering why I had trouble starting my 1987 300TD on an incline, I discovered I had a major drip from the bottom of the injection pump. Furthermore, the top of the injection pump is damp as...
Forum: Diesel Discussion 03-10-2004, 01:59 PM
Replies: 26
Views: 2,042
Posted By djankov
Thanks Peter, I will do them all this...

Thanks Peter,

I will do them all this weekend and let everyone know how it went!
Forum: Diesel Discussion 03-10-2004, 12:51 PM
Replies: 26
Views: 2,042
Posted By djankov
This problem also happens with a full tank. Where...

This problem also happens with a full tank. Where is the lift pump located?

1987 300 TD 196Km
1987 300D 184Km
2001 CLK 430 Convertible 34Km
Forum: Diesel Discussion 03-10-2004, 01:46 AM
Replies: 26
Views: 2,042
Posted By djankov
OK, the problem repeated twice only when the car...

OK, the problem repeated twice only when the car is parked on an incline overnight. When I park the car the other way (decline), no problem, it starts immediately! When I parked it on level ground,...
Forum: Diesel Discussion 02-27-2004, 09:22 PM
Replies: 26
Views: 2,042
Posted By djankov
I just tested the glowplugs for resistance and...

I just tested the glowplugs for resistance and they were all between 0.72 and 0.76 Ohms. Like I said earlier, the engine always started right up on the first crank once the glow plug light went off....
Forum: Diesel Discussion 02-27-2004, 08:59 PM
Replies: 26
Views: 2,042
Posted By djankov
I just tested the glowplugs for resistance and...

I just tested the glowplugs for resistance and they were all between 0.72 and 0.76 Ohms. Like I said earlier, the engine always started right up on the first crank once the glow plug light went off....
Forum: Diesel Discussion 02-27-2004, 06:23 PM
Replies: 26
Views: 2,042
Posted By djankov
Glow plug light works fine. I cranked it for...

Glow plug light works fine. I cranked it for about 45 sec and it finally started. It ussually starts immediately after the glow light light goes off.
I drove it around the block and the only thing...
Forum: Diesel Discussion 02-27-2004, 04:08 PM
Replies: 26
Views: 2,042
Posted By djankov
'87 300TD Wont Start

I just tied to start my 1987 300TD and it catches, but wont start. I replaced both fuel filters about 1500 miles ago. I looked at the antifreeze and the level is OK with no oil in it. What should I...
Forum: Tech Help 02-07-2004, 04:56 PM
Replies: 5
Views: 1,047
Posted By djankov
I just diagnosed mine today using the electronic...

I just diagnosed mine today using the electronic service manual. I printed out page 161 which has the electrical schematic for the system. I wanted to test the voltages at the N13 (Interval Wiper...
Forum: Tech Help 02-07-2004, 12:26 AM
Replies: 7
Views: 1,373
Posted By djankov
I replaced the struts on my 87 300TD today. I had...

I replaced the struts on my 87 300TD today. I had to use 3 chisels (progresively larger in size) to remove the pins from the back 2 hinges (+ WD40 of course). Most importantly, put these pins in ...
Forum: Diesel Discussion 02-02-2004, 11:28 PM
Replies: 4
Views: 857
Posted By djankov
After searching the forum extensively and...

After searching the forum extensively and debating DIY, I decided to bite the bullet and pay my mechanic $412 for the left rear bearing replacement on my 1987 300TD.

1987 300 TD ...
Forum: Bodywork - Repair, Paint, Tools, Tips & Tricks 01-25-2004, 11:25 PM
Replies: 5
Views: 1,001
Posted By djankov
More Pictures

More Pictures
Showing results 1 to 30 of 95

 
Forum Jump


All times are GMT -4. The time now is 07:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page