ALDA R&R disassembly, cleaning.

[whunter]

Where is it.
I have seen it before, but now I can't find it.
Could it have been in a thread that was removed???

[boneheaddoctor]

Originally Posted by whunter

Where is it.
I have seen it before, but now I can't find it.
Could it have been in a thread that was removed???

Well if it was one I started in my previous incarnation as thevirginiadude it would have been removed, but alas it wasn't.

I do know the one you speak of but I don't know. I do remember seeing it a long time ago..

[jbaj007]

This is from someone (gsxr), who definitely knows his way around and may be of help:

http://www.meimann.com/images/mercedes/OM603_injection/

[whunter]

Needed the graphics to explain operation theory.

[miamimike]

Originally Posted by boneheaddoctor

Well if it was one I started in my previous incarnation as thevirginiadude it would have been removed, but alas it wasn't.

I do know the one you speak of but I don't know. I do remember seeing it a long time ago..

Bonehead--that is a great animation next to your name-where did you download it??

[KCampbell]

Sure is easier to see the ALDA on a 617!!

Kevin

[boneheaddoctor]

Originally Posted by miamimike

Bonehead--that is a great animation next to your name-where did you download it??

Hijacked the AVATAR off someone else on another Board I am a member of.

find one you like....save as.........its a .gif image. Upload it as a new avatar.

[mplafleur]

Originally Posted by miamimike

Bonehead--that is a great animation next to your name-where did you download it??

That poor FAX machine. It didn't stand a chance...

[dannym]

I have seen that avatar before. It's from an xbox hacking site.

Danny

[d.delano]

http://articles.mbz.org/engine/diesel/alda/

I would like to know where to procure the seals for the ALDA- are these Bosch items or can I get them from Phil, or the dealer or what?

[boneheaddoctor]

Originally Posted by d.delano

http://engine.articles.mbz.org/diesel/alda/

I would like to know where to procure the seals for the ALDA- are these Bosch items or can I get them from Phil, or the dealer or what?

THe Dealer couldn't get me the IP to block gasket or the Oild filt twoer to block gasket in less than 30 days.....Phill had them in stock.

Try Phill first.

[whunter]

Quote:
Originally Posted by jbaj007
This is from someone (gsxr), who definitely knows his way around and may be of help:

http://www.meimann.com/images/mercedes/OM603_injection/

This link is dead.
Looking for a replacement link to ALDA rebuild...
If anyone has pictures and is willing to write a DIY, please send it to Bill = webmaster@peachparts.com with a note giving permission to add it to the DIY wickie page.

[Brian Carlton]

Here's the photos:

http://www.w124performance.com/image...IP_fitting.jpg

http://www.w124performance.com/image...LDA_apart1.jpg

http://www.w124performance.com/image...LDA_apart2.jpg

http://www.w124performance.com/image...LDA_bottom.jpg

http://www.w124performance.com/image...A_innards1.jpg

http://www.w124performance.com/image...n/ALDA_top.jpg

[pawoSD]

What exactly happens with the ALDA completely removed from the car....and then driving it... I thought about it and figure that it simply provides the absolute maximum amount of fuel that the ALDA was capable of supplying, except it does it at any speed/rpm. Right? How well does this work? Anyone tried it? Or does it just turn the cars behind you black and make mpg's fall to that of a 560SEL..... ?

I am looking to shim my ALDA at the very least, both of our cars have them backed all the way out CCW and still no smoke on take off even if you slam the pedal through the floor....

Anyone have the shims? I'd probably need enough to do major shimming on two vehicles... (I'd like to readjust the ALDA's to the normal setting and compensate with the shims)

[Johnhef]

mine used to smoke with the original one turned up- it sprung a leak and got replaced with one that i maxxed out- no smoke. I got one today for $6 I'm going to swap out and see what I can get from it...