1990 300sl Soft top replacement

[SL man]

I have a 1990 300sl and the soft top is looking a little worn, so I have purchased a new one, does any one know hot to fit on of these or where to get some instructions? local dealer not really being very helpful

i have some instructions, i tried to post them here, but they are too large, send me an email, maybe i can send them that way.

[waybomb]

I plan on this same job this summer. Could you send me the instructions as well?

i will need to put them on a cd and send by us mail, they are too big to post or email,. send me an email sat to remind me i need to send them to you.

[SL man]

Thanks for this

[GSMITH]

This link has the instructions you are looking for.

http://www.worlduph.com/mbtopinstall.htm

It claims elapsed time aproximately 4 hours.

According to other posts install costs around $400.

If you are going to do this yourself why don't you document it for a DIY article.

Originally Posted by GSMITH

This link has the instructions you are looking for.

http://www.worlduph.com/mbtopinstall.htm

It claims elapsed time aproximately 4 hours.

According to other posts install costs around $400.

If you are going to do this yourself why don't you document it for a DIY article.

i believe those are for the 107 SL only, they need them for the newer 129 SL. stand by guys, i will get it off to you soon.

[Toxicant]

I did one about 5 years ago on a 90 300SL, what a nightmare. It took me two days and I would never do it again. Find a decent shop and pay the money.

Everything was pretty straight forward other then where the rear section meets the front, there is a rubber strip on the outside that has to go in between the two canvas pieces and they wrap around a steel bow.

All I can say is good luck

just wanted to let those of you waiting for the info that i have hit a snag, i tried to make them into a pdf file, but since the document is so large, my acrobat is having some issues, i will work more with it this weekend, sorry for the delay.