Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > SL Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-02-2006, 10:07 PM
Registered User
 
Join Date: Apr 2000
Location: eastern NC
Posts: 149
side molding

Does anyone know how the side molding mounts to the car (1984 500 SL). One end of my right side is loose and after taking the door panel off I can't find or feel any nuts or even the studs themselves to the molding.
Thanks,
Mike
Reply With Quote
  #2  
Old 08-03-2006, 12:16 AM
Strife's Avatar
General Purpose Geek
 
Join Date: Apr 2004
Location: KY USA
Posts: 2,238
Well, there is a sliding clip on the end towards the front of the car, and a single screw holding the other end. Inbetween there are several "pop clips" or whatever they are called. All the clips, screws, and parts that go into the "red/white berries" mounted in the sheetmetal are capable of sliding a little. If your front edge is loose, the clip slipped out or rusted; if your rear edge is loose, the screw lost a nut or is rusted (the screw/nut is under the rubber seal on a 560SL at the edde of the door at the lip of the door).
__________________
86 560SL
With homebrew first gear start!
85 380SL
Daily Driver Project

http://juliepalooza.8m.com/sl/mercedes.htm
Reply With Quote
  #3  
Old 08-03-2006, 03:35 PM
Super Moderator
 
Join Date: Apr 2000
Location: Falls Church, VA
Posts: 5,316
You can get the slider and the screw fitting from the dealer, but IME it is very hard - as in I haven't been able to do it - to replace the slider without damaging the trim piece.
__________________
Chuck Taylor
Falls Church VA
'66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page