|
|
|
#1
|
|||
|
|||
129 console box part # needed and some help
i have a 1990 129 and have seen on the internet a seller offering an OEM replacement box for the dated cassette holder in the canter console. add says it takes only a screwdriver and 2 min to change it,
my dealer cant find the part and i am not sure how to get the cassette holder out even if i found the part. any help would be great thanks |
#2
|
|||
|
|||
If it's the same unit I bought, you won't even need a screwdriver. The original cassette holder is just held in by plastic clips built into the sides. The new unit will also just "pop" into place.
__________________
Resistance is Futile. |
#3
|
|||
|
|||
thanks, where did you get the new box, from a mb dealer or
from and secondary seller? the reason i ask is that i bought a chrome shift bezel from the dealer that was $16 and it was $45 from the secondary seller. they also have the console box @ $89. but i bet it is around $30 @ dealer if i can get a part #
|
#4
|
|||
|
|||
I'm not sure about these numbers, but try looking up...
129-680-09-91 129-683-0000-RSM
__________________
Resistance is Futile. |
#6
|
|||
|
|||
I changed my cassette case. It cost around $50+ you can order it on this sight from.
Toll Free 1-888-333-4642 or philip@peachparts.com He has a number. |
#7
|
|||
|
|||
Stats reply above helped me when I posted a thread about the same thing. The cassette holder does just pop out with the aid of a couple of credit cards or something similar.
|
#8
|
|||
|
|||
Thanks, i will look into this. great tip on how to get
cass holder out, and i will order the part. $38 @ my dealer
|
Bookmarks |
|
|