Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > SL Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-11-2008, 05:14 PM
Registered User
 
Join Date: Feb 2008
Posts: 12
92 300SL seat adjustor control panel loose

I just bought a '92 300SL and the small woodgrain panel that holds the seat adjustment controls is very loose on both doors. Sliding my fingers behind the panel, I can feel some plastic clips on the back side of the panel, but nothing for them to attach to on the door. I assume there must be some posts that are supposed to be in the door that are broken off.

Can anyone suggest how to fix this? Are the posts something that can be purchased separately? If so, any idea what the part number is? Any alternative ideas how best to attach these panels to the door?

Scott
Reply With Quote
  #2  
Old 02-11-2008, 06:27 PM
Philip Justice's Avatar
Registered User
 
Join Date: Feb 2008
Location: East Central, Florida
Posts: 105
Seat Control Panel

Phil Here, Regarding your Panel: I used a dab of clear "Goop adhesive and Clamped in with a rolled up rag against the pull handle. It works great and you can always remove it with a little pry pressure. Hope it works for you!

Phil Justice
1992 Sweet 500SL
Reply With Quote
  #3  
Old 02-11-2008, 07:34 PM
speace's Avatar
Member
 
Join Date: Jan 2003
Location: Atlanta, GA
Posts: 370
Mine did the same thing. There were no broken tabs on the door panel, but the tabs on the switch panel had worn slots in the composite board of the door panel allowing the switch panel to pop out.

One side is secured by four little tabs as described above, the other side is secured by two spring clips. You can see the tabs along the left in my picture. The two spring clips are barely visible on the right. There are no "posts" on the door panel for clips or tabs to attach to. The tabs secure one side by reaching behind the panel. The spring clips press on the other side of the opening to wedge the switch panel in place. I added the metal strip because the four tabs actually wore grooves in the composite door panel leaving nothing to secure to.

I repaired my door panel by reinforcing the grooved areas by epoxying a thin metal strip to the back of the door panel, thus restoring the damage.

For a metal strip I cut up a metal strip from Home Depot that was originally designed to be used to secure floor joists to each other...

You can see my 'fix' in the attached picture. You can see the tabs on the left and the spring clips on the right. My example is for the driver's (LH) door and has held up extremely well.

The procedure to remove the door panel is posted elsewhere on this site.
Attached Thumbnails
92 300SL seat adjustor control panel loose-back-panel.jpg  
__________________
02 S500
92 500SL
92 400E
87 300E (Sold)
83 300D Turbo (Sold)
75 300D (Sold)
74 240D (Sold after 20 years)
65 Mustang 5.0 (w/Electronic Fuel Injection)

Last edited by speace; 03-18-2008 at 07:33 PM. Reason: typos
Reply With Quote
  #4  
Old 03-18-2008, 07:15 PM
Registered User
 
Join Date: Nov 2000
Location: west chicago,il,usa
Posts: 68
I had the same problem numerous times on my 92 500sl. there
are plastic connector and metal clips that hold the seat adjustment
to the door and they often break overtime. I would suggest:

1. Search this site for door panel removal guide/instructions. Although
you wont remove the door panel, the instructions include removing the
woodgrain panel.

2. Once removed, look for part numbers on the "broken" pieces of
plastic and order from MB. Make sure your order the little metal clips.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page