|
|
|
#1
|
|||
|
|||
560SL Front Wheel Bearing Seal P/N
I ran into a problem this weekend which now has my 1988 560SL completely disabled.
I removed the front wheel seals with the intent on replacing them. I damaged the old one so they are no longer usable. The replacements I have are too big, but the part number in EPC says they are correct. The part number I have is A 011 997 51 47 which is both on the package and on the seal itself. According to EPC this is the correct number. The size of the seal is 45x64x12. I really need 45x60x10. I know I can probably look up a National equivalent but I prefer to use the genuine MB. Does anyone know the real part number. John Roncallo |
#2
|
||||
|
||||
No bites, John.
__________________
http://www.benzypalooza.com/index.htm |
#3
|
|||
|
|||
Seal
Quote:
and the size is 45x62x10. Could yours be 62mm outer dia.? naj |
#4
|
|||
|
|||
Wise guy. Deciding to bump this to the top. Like I said I was just testing everyone. Lets see if anyone catches on.
John Roncallo |
Bookmarks |
|
|