Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Mercedes-Benz SL Discussion Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-28-2008, 12:56 PM
Philip Justice's Avatar
Registered User
 
Join Date: Feb 2008
Location: East Central, Florida
Posts: 105
4 Tip Exhaust Completed

Phil Here, Would there be a way to adjust the travel limitation on my side widows on the SL. without taking off the door panel? The window on the drivers side goes up to much and interrupts the smooth closing of my door.
I use to do it on my old 450SL but don't know if it's possible on the 500SL.

If there is a secret please let me know.

1992 Sweet 500SL Phil Justice


Last edited by Philip Justice; 03-18-2009 at 12:46 PM.
Reply With Quote
  #2  
Old 06-29-2008, 01:58 PM
Philip Justice's Avatar
Registered User
 
Join Date: Feb 2008
Location: East Central, Florida
Posts: 105
Side Window Limit Fix?

Phil Here, Come on guys. I have to lower the upward travel limit on my drivers side window. As a last resort i will take my door panel off but am reluctant to do so. If there is anyway to do this i need to know?

I removed the Chrome plate on my door jam and found a Screw with a sliding "Do-Hickey" attached, the screw is attached to a Plastic piece.
The Screw is at It's lowest point in the slot, But again, I don't know if this is an adjustment for the Window height?
Please Chime in if you have any info on this subject.

1992 Sweet 500SL Phil Justice
Attached Thumbnails
500SL Side Window Open Limit?-auto%2520-54-.jpg  
Reply With Quote
  #3  
Old 06-29-2008, 02:14 PM
Pete Geither's Avatar
Half Fast Moderator
 
Join Date: Feb 2002
Location: Western Pa.
Posts: 2,417
Phil,,, any door I have ever been into,,, and I've been into a ton, the adjustments are always deep inside the door shell. If there are adjustments for what you need, bets are that the door panel has to come off. Very seriously doubt there is a quick and easy fix,,,, but I may be wrong,,,,,, Just want to let you know, people do read these, and if an answer is out there, it will appear in due time. BTW,,, are those pipes Photoshopped ?
__________________
95 SL500 Smoke Silver, Parchment 64K
07 E350 4matic Station Wagon White 34K
02 E320 4Matic Silver/grey 80K
05 F150 Silver 44K
Reply With Quote
  #4  
Old 06-30-2008, 11:11 AM
Super Moderator
 
Join Date: Apr 2000
Location: Falls Church, VA
Posts: 5,318
There are front and rear upper stop brackets that can be adjusted. You do need to remove the door liner to get at them. I have not personally done this, the information is from alldatadiy. The adjustment process is complicated, and you should consider getting an alldatadiy subscription or the Mercedes CD if you are going to attempt it.
__________________
Chuck Taylor
Falls Church VA
'66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe
Reply With Quote
  #5  
Old 07-26-2008, 12:08 PM
Pete Geither's Avatar
Half Fast Moderator
 
Join Date: Feb 2002
Location: Western Pa.
Posts: 2,417
Looks very nice,,, great job !!
__________________
95 SL500 Smoke Silver, Parchment 64K
07 E350 4matic Station Wagon White 34K
02 E320 4Matic Silver/grey 80K
05 F150 Silver 44K
Reply With Quote
  #6  
Old 07-26-2008, 09:39 PM
aam aam is offline
Registered User
 
Join Date: Sep 2006
Location: California
Posts: 115
Quote:
Originally Posted by Philip Justice View Post
Phil Here, Well here it is, I just had fabricated and Installed the new 4 Tip Exhaust system for the rear of me 500 SL. I have been working on the Idea for some time now. The system can be put back to stock at any time due to the " Flanged" application of the Pipe set-up. I had a shop bend and weld the split rear section of the exhaust. I used 2.5 and 1.5 Stainless Pipe. The cost was 200.00. The 4 AMG oval tips were purchased on Ebay for 49.00 plus shipping. [What a deal]. The only cutting modification was to remove the rear Tow bar and to cut the rear Valance slightly to except the additional 2 Tips. Heat is not a problem due to wrapping the 1.5 in. pipe with heat proof wrap.

The Exhaust System looks and sounds great, with little modification to the SL. I could have placed the Exhaust Tips higher into the rear bumper but I did not want to cut out to much of the Plastic Valance.

I think it looks hot and it is functional, Also I did not have to spend 6,000 on a complete AMG system. Let me know what you think?

Two photo"s Included.

1992 Sweet 500Sl Phil Justice
Very nice work.
Can you provide the amg seller?
I will like to do the same.
Regards.
aam.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page