|
|
|
#1
|
|||
|
|||
Rear Convert Hydraulics (blind guy can do it?)
Is there any information available on how to replace the rear cylinders on a 1993 SL300?
I just replaced the front latch cylinder above the pass visor and not one day later, the driver's rear is pouring out? I would appreciate any help on "how to" do the rear ones. PS, the front was so easy "a Blind guy" could do it! (I'm about 75% blind, GLAUCOMA) Thanks, Marcio
__________________
Schettini 1996 S420 (45,00O) 1994 SL320 (96,000) 1992 SL500 (82,000) 1990 300E (183,000) 1993 300E (99,000) sold 1988 190D (125,000) sold |
#2
|
||||
|
||||
Just look at them. It is self explanatory, really. Nothing hard about it. The lines disconnect the same way.
__________________
Thank You! Fred 2009 ML350 2004 SL600 2004 SL500 1996 SL600 2002 SLK32 2005 CLK320 cabrio 2003 ML350 1997 C280 Sport |
#3
|
||||
|
||||
Quote:
__________________
Mit freundlichen Grüßen, Lynn 2000 SL500 Silver 2000 SL500 SOLD 1989 560SL SOLD 1988 560SL SOLD |
#4
|
||||
|
||||
I second that on Dennis Ficken.
__________________
Thank You! Fred 2009 ML350 2004 SL600 2004 SL500 1996 SL600 2002 SLK32 2005 CLK320 cabrio 2003 ML350 1997 C280 Sport |
Bookmarks |
|
|