Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > SL Forum

Reply
 
LinkBack Thread Tools Display Modes
  #46  
Old 06-22-2009, 02:41 PM
Benzmeister's Avatar
W107 Person
 
Join Date: Aug 2003
Location: Chicopee, Ma
Posts: 138
Vacuum pump

Quote:
Originally Posted by Benzmeister View Post
I also have a vacuum pump and tested the pods or rubber diaphrams and they all worked the way they should. I had a buyer looking at the car yesterday, he told me of a private Mercedes shop in a nearby town that works on these HVAC systems. The guy has a 76, 81 SLC's and a 95 SL500 He took my 79 for a hours ride and when he returned he said this is one of the best running SLC's he has driven. Now if I could only get the HVAC to work. I did fix the vacuum leak on the passenger side. The vacuum was leaking back to the tank I put one of the blue and black thing in line on the blue vacuum hose now the door lock, gas door lock trunk lock all work. I checked in the shop manual on the HVAC, the vacuum for the HVAC is supposed to come directly off the engine, a white vac tube from the main vacuum distribution point. Can find this vacuum tube/line on my car?

PS: The guy who test drove my car is thinking about buying it as is. He said aside from the HVAC the car is in great shape, better then his other two and for what I am asking for it, its a steal.
I also have a vacuum pump and I tested part of the system and no leaks, I have to get around to testing the full system, but I have a potential buyer for the car, (he owns 3 SLC's) and he is not too concerned about the HVAC.
__________________
Al Lueb
1999 C280 54K miles
1979 450 SLC 144K miles
Reply With Quote
  #47  
Old 06-23-2009, 08:55 AM
Registered User
 
Join Date: Sep 2004
Location: Dublin, Ireland
Posts: 385
Quote:
Originally Posted by SilverSaloon View Post
hi

well done - i hope you get them working again.

A1078240011 is the Merc part number for the wiper steel block. very cheap from a dealer.

EDIT - just rang my dealer and apparently the above part number may be NLA - so you (and me aswell) may have to make one up. i recon the easiest way to do this would be to buy a washer and then with careful use of an angle grinder, shape it into the correct size using the other side as a template.

also another good tip is to fit the steel block and the retaining nut loosly BEFORE re-attaching the bumper. the wiper will then slot in, but getting the nut on the bumper with it in situ is quite fiddily, on euro bumpers atleast.
Hi,

Thanks for the advice, I found an old ring spanner that came with some self assembly thing that was the right thickness and width so will bodge it from that. Couldnt resist making a video of this over-engineered contraption before I re-assembled it !

http://www.youtube.com/watch?v=y69Oe-VV0z4

Cheers,
Gary
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page