|
|
|
#1
|
|||
|
|||
1997 SL500 Crank No Start
Two different known good crankshaft position sensors installed and car still cranks with no start condition. I can hear the fuel pump energizing in the trunk with the key in the "on" position. OBDII code reader reveals P0441 code. I have had the car for 4 weeks and it has run flawlessly until now. Any ideas?
|
#2
|
|||
|
|||
It is always helpful to post the code description.
Put a test light across an injector and look for light to blink when cranking. You also need to check power feed to ignition coils. Pull a spark plug on each side of engine and do a quick compression test to assure the timing chain is OK. |
Bookmarks |
|
|