|
|
|
#1
|
|||
|
|||
SL 129 Hard Top
HELP!!! Only the 2 rear pins are releasing our 1990 300SL hard top - the front 2 won't budge! New problem - it has always worked before. Any suggestions welcome. Thanks, Craig
__________________
90 300SL Pearl Gray 92 300CE Smoke Silver |
#2
|
|||
|
|||
According to M.B. Doc...
"The front lock elements... is the cause of most hyrdaulic R129 soft top problems!" See This topic comes up alot on the SL forum>>>. You can do some basic troubleshooting which may confirm the front lock elements are the source of your trouble. I have the diagnostic manual for the convertible top system and can assist you if you like.
|
#3
|
|||
|
|||
There is a way to release them by hand. Read your owner's manual. It is all there.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
#4
|
|||
|
|||
Craig, try to release the top when the weather and the car are cool, this seems to make a difference on my car. Otherwise, you can use the supplied allen wrench (or equivalent) to unlatch the bow locks by hand. Eli.
__________________
________ '90 500SL (sold) 17" AMG's |
Bookmarks |
|
|