Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Mercedes-Benz SL Discussion Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-11-2003, 01:09 PM
rjcamp
Guest
 
Posts: n/a
Unhappy 500 sl soft top problems.

Soft top management on my 500-sl works intermittently. Most times when raising the top, it will get as far as nearly vertical, then stop. This then requires several attempts at cycling the procedure before it works. Conversely, when attempting to lower the soft top, the procedure will stop just before the front portion of the top is ready to raise from the windshield. Again, several cycles are required to accomplish. Any suggestions?

Reply With Quote
  #2  
Old 06-11-2003, 05:23 PM
Gilly's Avatar
Registered User
 
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
There were a few different management systems on this car. By your description, I am guessing your car is between a 1990 and 1994 or so. These had a switch in the inside of each door that was closed by the window hitting the bottom of it's travel. If one of these switches didn't operate correctly, the top would operate as you state-it would stop in the vertical position, because the control module needs to see the windows in the full down position before going any further than the vertical position, or it could damage one of the windows. My guess is that the part of the window frame that contacts the switch has come out of adjustment.
When the top stops in mid travel, try gently pushing down with your hand on the top edge of the glass, on both sides, to see if the top will start operating again. Try it one side at a time to see if you can locate the side that is causing the problem.

Gilly
Reply With Quote
  #3  
Old 07-11-2003, 09:13 AM
QP1955
Guest
 
Posts: n/a
Quote:
Originally posted by Gilly
There were a few different management systems on this car. By your description, I am guessing your car is between a 1990 and 1994 or so. These had a switch in the inside of each door that was closed by the window hitting the bottom of it's travel. If one of these switches didn't operate correctly, the top would operate as you state-it would stop in the vertical position, because the control module needs to see the windows in the full down position before going any further than the vertical position, or it could damage one of the windows. My guess is that the part of the window frame that contacts the switch has come out of adjustment.
When the top stops in mid travel, try gently pushing down with your hand on the top edge of the glass, on both sides, to see if the top will start operating again. Try it one side at a time to see if you can locate the side that is causing the problem.

Gilly
Any one knows how to fix the convertiable top on 1991 300SL, the fluids came out, and can't find the where leak came from, is this a closed system?
Reply With Quote
  #4  
Old 07-11-2003, 04:19 PM
Gilly's Avatar
Registered User
 
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
It's a closed system. You have NO idea where the fluid went?
You probably need a hydraulic cylinder, it can be a difficult repair, depending on which cylinder is bad.

Gilly

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page