380SL Spark Plug Wires - Hard To Get Off?

[ezrider]

Is there a specil tool or technique needed to pull these wires off at the spark, they are really on tight?

Thank You.

[Pili380SL]

The boots tend to get stuck on the ceramic coating of the plugs because of heat. Try to twist the boot until you feel it break loose and turn freely. A good pull should then un-clip it from the spark plug.

[txstinger]

When going back on with your lower boot, apply some dielectric grease to the inside of the boot. This will help keep them clean and from sticking to the plugs.