|
|
|
#1
|
|||
|
|||
C280 Front wheel bearings - special tools?
Do I need a press or anything special to replace the front wheel bearing on a C280?
I know how to adjust them and all. Just wondering if they come right out of the hub or if they are press fit? |
#2
|
|||
|
|||
Nobody?
|
#3
|
|||
|
|||
the bearings inner races are an interference fit on the hub, it it remains in the hub when it is pressed out of the carrier you'll need a knife edge bearing puller
|
#4
|
|||
|
|||
The races will come out just like any other brand of car. After cleaning up the hub so no grease is present, just use a punch from the opposite side. Easy job.
Good luck, |
Bookmarks |
|
|