PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Compressor and clutch install, questions (http://www.peachparts.com/shopforum/tech-help/100839-compressor-clutch-install-questions.html)

Ron in SC 08-05-2004 09:29 AM

Compressor and clutch install, questions
 
Vehicle: 92 300E; everything is apart and accessible

Prior to install of new compressor I have a few technical questions:

1-Do I add a quantity of refridgerent oil into compressor or manifold lines? If so how much and what type? In the past I've used 525 viscosity, waxfree on my other older Mercedes vehicles.

2-When I install the new fan clutch to the new (rebulilt) compressor how do I tighten the 13mm bolt that hold it to the splined shaft? To remove the bolt I just used an impact wrench and it came off easily.


All times are GMT -4. The time now is 07:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website