|
|
|
#1
|
|||
|
|||
How do I do it guys ?
My odometer is broken. Inspired by several posts I decided to fix it. Whent trough hell puling my cluster out (stuck preaty bad). Finaly took the hole thing apart and got stuck with the speedometer nidle. Have not even a slitest idea how to get it of. I also noticed that other nidles look a lil bit diferent than the speedometer. How do I get them of? I want to make and instal my own wite gouges (scaner, fotoshop and a good printer and paper should do it) so I will need to get all of them out first. ------------------ Dmitry 90' 300CE 17" Lorinsers RS90 Brulen mufler Clear Blinkers |
#2
|
|||
|
|||
Watch it!
I broke the pin that holds the needle on my tachometer doing this. They have to come out straigh up, with no sideway motions to loosen them. If you are determined to do it maybe use a noseplyer and have the pine sit in the middle and just pull by the very tip of the plier and from the handle evenly. Before you do anything you might want to take pics of how the needle sit on their of possition, at their one position, and at 1000rpm, at 20 or 10mph. This will help you to verify if they are working fine onece you put them back together. or you can take it to a local speedo shop and see if they can do something for you Good luck |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1986 300SDL Question | Marcb | Diesel Discussion | 21 | 02-17-2010 07:17 PM |
300 SDL vs. 300 SD ? | Benster Tom | Diesel Discussion | 8 | 03-23-2004 11:02 PM |
1998-99 300 td anybody have problems? | grease lightnig | Diesel Discussion | 8 | 09-05-2003 01:22 AM |
Engine removal on 300 TE 4matic....... | dasboot | Tech Help | 2 | 09-04-2001 03:45 AM |