PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   190 e Drag link (http://www.peachparts.com/shopforum/tech-help/10190-190-e-drag-link.html)

JDUB 11-03-2000 12:06 AM

I have noticed my 190 that used to handle pretty good feeling a little "nervous" at high speeds 65-75 mph on highway on-off ramps. Everything feels tight in the front end , ball joints,idler arm,tie rods except for the drag link. I've rplaced the drag link about 50,000 miles ago and feels exactly like when I installed it. I moves back and forth sort of loosely,not stiff like the tie rod ends. The car never felt 100% right. I had an alignment and new tires put on, but I feel the shop that did the alignment doesn't have a clue about Mercedes Benz alignments. The said the front suspension was ok but I suspect maybe I was sold a new drag link that wasn't upto snuff. Shouldn't it be as stiff as the tie rod ends?
Thanks for your help, I didn't buy the drag link from Mercedes Shop but all the other parts that I have purchased from Mercedes shop were of excellent quality.

J.HIDALGO 11-03-2000 06:29 AM

What about your rear end? How many miles? I am having a similar problem with my 300E. The whole front end was replaced and, the car still feels loose at high speeds. I know, I have to change some parts in the rear linkage, whenever I get a some time and money. You may want to look into it. Good Luck!


------------------
J.H.
'86 300E


All times are GMT -4. The time now is 03:11 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website